User Tools

Site Tools


group_secar2.0

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
group_secar2.0 [2018/09/10 16:12]
plastun
group_secar2.0 [2018/09/11 15:37]
wagner
Line 22: Line 22:
 Assume normalized emittance 0.6 π mm mrad provided from ReA3 at 3.0 MeV/u. \\ Assume normalized emittance 0.6 π mm mrad provided from ReA3 at 3.0 MeV/u. \\
 Geometric emittance is 0.6/0.08 = 7.5 π mm mrad.\\ Geometric emittance is 0.6/0.08 = 7.5 π mm mrad.\\
-Spot size on the target is ±0.5 mm (full width). Than anglular spread is ±15 mrad.\\+Spot size on the target is ±0.5 mm (full width). Then anglular spread is ±15 mrad.\\
 Adding the effect from the target of 0.13 deg = ±2.26 mrad we get ±17.26 mrad of angular spread:\\ Adding the effect from the target of 0.13 deg = ±2.26 mrad we get ±17.26 mrad of angular spread:\\
 SB 0.0005 0.01726 0 0.0005 0.01726 0 0 0.0047 0 0 0 ;\\ SB 0.0005 0.01726 0 0.0005 0.01726 0 0 0.0047 0 0 0 ;\\
  
 {{ :dipole46cr13.png?400 |}} {{ :dipole46cr13.png?400 |}}
-[[Test|Test]]+ 
 + 
 +**Emittance measurement**\\ 
 +Distance between Q7 center and focal plane is 6.085 m. 
 +{{ :emittance.png?400 |}} 
 + 
 +Q7 strenght variation:\\ 
 +|B [T] |Xmax[m] |ap [m] |Brho [Tm] |L [m] |K| 
 +|0.02 |2.91E-03 |0.13 |0.8 |0.34 |0.065384615| 
 +|0.01 |2.27E-03 |0.13 |0.8 |0.34 |0.032692308| 
 +|0 |1.62E-03 |0.13 |0.8 |0.34 |0| 
 +|-0.01 |1.20E-03 |0.13 |0.8 |0.34 |-0.032692308| 
 +|-0.02 |9.08E-04 |0.13 |0.8 |0.34 |-0.065384615| 
 +|-0.03 |6.23E-04 |0.13 |0.8 |0.34 |-0.098076923| 
 +|-0.04 |9.54E-04 |0.13 |0.8 |0.34 |-0.130769231| 
 +|-0.05 |1.60E-03 |0.13 |0.8 |0.34 |-0.163461538| 
 +|-0.06 |2.26E-03 |0.13 |0.8 |0.34 |-0.196153846|\\ 
 + 
 +**Fit of the data to parabola** 
 +{{ :plot.png?400 |}} 
 + 
 +a = 0.000362572706 \\ 
 +b = 0.0834414129893 \\ 
 +c = 3.506973286e-07\\ 
 +double check for beam size calculation in Q7: X_calculated = X_cosy_read_out = 3.55 
 +Emittance = 3.045387898578198e-07  π m rad= 0.3 π mm mrad 
 +start beam emittance= XX * AX= 0.2 π mm mrad so the emittance grows from the start to the focal point 
/srv/thewikis/JIOSS/data/pages/group_secar2.0.txt · Last modified: 2018/09/13 16:49 by plastun