Differences

This shows you the differences between two versions of the page.

--- group_secar2.0 [2018/09/13 16:20]
plastun
+++ group_secar2.0 [2018/09/13 16:28]
wagner [Optics misalignments]
@@ Line 114: / Line 114: @@
 SRDE:= 0.0;
 </code>
+The rays now look like this (not all the rays are displayed):
+{{ :rays.png?400 |}}
 Created loop for target position. Observed piece-wise curve for resolution vs target offset (meters) (see figure below) in case of 4th order calculation. If order reduced to the 1st, than curve is smooth, but maximum resolution is shifted.
@@ Line 136: / Line 138: @@
 **Dipole 4 position. Longitudinal offset**\\
 {{ :longitudinal_shift_b4.jpg?450 |}}\\
+**Dipole 4 position. Pitch**\\
+{{ :pitch_b4.jpg?400 |}}
 |Element|Variable |Range of ±5%|
 |Beam|transverse|-5..+7 mm|
 |Beam|longitudinal|-0.8..+0.5 mm|
-|Beam|size|-x..+x|
+|Beam|size|-6%..+6%|
 |B4|transverse|-4..+1 mm|
-|B4|longitudinal-10..+55 mm|
+|B4|longitudinal|-10..+55 mm|
+|B4|pitch|-0.11..0.024 rad|
 ==== Recoil tracking in SECAR ====

JINA-CEE ION OPTICS SUMMER SCHOOL: JIOSS 2018