This is an old revision of the document!
acceptance (+/-40 mrad). This doesn’t seem to be true in SECAR: 15O(p,g)19Ne pushes the energy
acceptance (+/-3.1%) but not in the angular acceptance (only +/-15.6 mradvs. SECAR’s +/-25 mrad acceptance). Is there a reason SECAR was designed with angular acceptance so much larger than the energy acceptance? * 5) Purpose of SECAR Section 3? * 6) On slide 6, what is the meaning of the arrows the Effective Field Length and Good Field Regions? * 7) Extended target for SECAR? * 8) Engefunction (not from this Lecture)? * 9) Is Q1 (Quad + Hex) used or only a design feature? * 10) x_HO= (x’|x)*2_0 + HO, how are the higher order terms (HO) added * 11) Clarify D in the definition of the Nominal Beam definition * 12) Why is the alignment adjusted before and after the ion optical element? * 13) Can the recirculatory-ring for projectile beam increase the nuclear reaction rate? I.E. can we return the projectile beam (passed through the target) to the beam again. * 14) Alignment example not clear. * 15) Does higher order effects give us details about the initial beam characteristic? Or do HO effects tell us that the beam line is different than what we think? ( e.g. field imperfections in the magnets etc.)