This shows you the differences between two versions of the page.
Both sides previous revision Previous revision | Next revision Both sides next revision | ||
detectors [2016/12/28 16:36] pereira [Cathode Readout Drift Chambers (CRDC)] |
detectors [2016/12/28 16:37] pereira [Tracking Parallel Plate Avalanche Counters (TPPAC)] |
||
---|---|---|---|
Line 19: | Line 19: | ||
Each TPPAC has an active area of 10 cm x 10 cm and is filled with isobutane at a typical __pressure of 5 torr__. The detector consists of a cathode foil with a series of aluminum strips oriented in the non-dispersive direction, followed by an anode plate and a second cathode foil with the strips oriented in the dispersive direction. A total of 128 pads are connected to the strips of each cathode foil. The x and y positions are determined from the charge distribution on the pads. The position calibration was done using the pad pitch of 1.27 mm. | Each TPPAC has an active area of 10 cm x 10 cm and is filled with isobutane at a typical __pressure of 5 torr__. The detector consists of a cathode foil with a series of aluminum strips oriented in the non-dispersive direction, followed by an anode plate and a second cathode foil with the strips oriented in the dispersive direction. A total of 128 pads are connected to the strips of each cathode foil. The x and y positions are determined from the charge distribution on the pads. The position calibration was done using the pad pitch of 1.27 mm. | ||
- | The particles transmitted through the TPPAC ionize the gas, producing electrons and positive ions. The drift of electrons towards the central anode plane induces an image charge on the aluminum strips. The signal generated on a given pad is sent to a preamplifier, | + | The particles transmitted through the TPPAC ionize the gas, producing electrons and positive ions. The drift of electrons towards the central anode plane induces an image charge on the aluminum strips. The signal generated on a given pad is sent to a preamplifier, |
1 x 10< | 1 x 10< | ||