Differences

This shows you the differences between two versions of the page.

--- electronics [2013/12/11 19:10]
pereira [Documentation]
+++ electronics [2013/12/22 17:10]
pereira
@@ Line 4: / Line 4: @@
   * [[Electronics#Inventory Modules|Inventory Modules]]
   * [[Electronics#Electronic Diagrams|Electronic Diagrams]]
-  * [[Electronics#Documentation|Documentation]]
+  * [[Electronics#Documentation|Electronic Manuals]]
   * [[Trigger|Trigger]]
+     * [[Trigger#Trigger schemaatics|Trigger schematic]]
+       * [[Trigger#Trigger box|Trigger box]]
+       * [[Trigger#Gate generation|Gate generation]]
+       * [[Trigger#Inspect channels|Inspect channels]]
+       * [[Trigger#Busy Circuit|Busy Circuit]]
+       * [[Trigger#Time Stamping Scheme|Time Stamping Scheme]]
+     * [[Trigger#Trigger module|Trigger module]]
+       * [[Trigger#CAMAC commands|CAMAC commands]]
+       * [[Trigger#Inputs and outputs|Inputs and outputs]]
+       * [[Trigger#FPGA firmware|FPGA firmware]]
+     * [[Trigger#Time stamping|Time stamping]]
+     * [[Trigger#Configuration for S800 in tandem with other detectors|Configuration for S800 in tandem with other detectors]]
+     * [[Trigger#Begin sequence|Begin sequence]]
+     * [[Trigger#Scalers and dead time|Scalers and dead time]]
+===== Crate Configuration =====
+Most of the S800 electronics is installed in two racks inside the cabinet seating on the top level of the S3 vault, right in the north side of the [[Stations#Focal Plane Station|focal plane station chamber]] (see picture below). There is a total of six crates mounted in the two racks. The left rack contains a [[CAMAC crate]] on the top and two NIM crates, [[NIM crate 1]] on the middle and [[NIM crate 2]] on the bottom. The right rack includes a [[Electronics#VME crate]] on the top, [[NIM crate 3]] on the middle  and [[NIM crate 4]] on the bottom.
-===== Crate Configuration =====
+{{:wiki:cabinet-electronics.jpg?450}}
-A preliminary scheme of the crate configuration (in progress) can be found {{:wiki:s800electronicstcrateconfiguration2.pdf|here}}.
+|The electronics cabinet with the electronics of the S800.}}
+=== VME crate ===
+{{:wiki:vme-crate.jpg?450|VME crate}}
+=== CAMAC crate ===
+{{:wiki:camac-crate2.jpg?450|CAMAC crate}}
+=== NIM crate 1 ===
+{{:wiki:nim-crate1.jpg?450|NIM crate 1}}
+=== NIM crate 2 ===
+{{:wiki:nim-crate2.jpg?450|NIM crate 2}}
+=== NIM crate 3 ===
+{{:wiki:nim-crate3.jpg?450|NIM crate 3}}
+=== NIM crate 4 ===
+{{:wiki:nim-crate4.jpg?450|NIM crate 4}}
@@ Line 44: / Line 86: @@
       * {{:wiki:Manual_Phillips_ADC_7164.pdf|Manual for the ADC Phillips 7164 module}}
       * {{:wiki:Manual_Ortec_TAC_566.pdf|Manual for the TAC ORTEC 566 module}}
+      * {{:wiki:Manual_Canberra_HV_3002D.pdf|Manual for the HV Power Supply Canberra 3002D module}}
   * Firmware FPGA Schematics
       * {{:wiki:Usbtrig.pdf|Trigger module firmware (ULM LeCroy 2367 )}}

S800 Documentation

User Tools

Site Tools

Differences

Page Tools