Differences

This shows you the differences between two versions of the page.

--- event_filter [2015/10/30 15:34]
pereira [Scintillator packet]
+++ event_filter [2015/10/30 17:02]
pereira [CRDC packets]
@@ Line 8: / Line 8: @@
 ==== Time-stamp packet ====
-The timestamp is coded by the XLMV72 module for each event as a 64-bit word. The Event Builder and Event Filter parse it as a set of four consecutive 16-bit words.
+The timestamp is encoded in the [[S800 USB DAQ data format#Tag 0x5803: XLM72 time stamp module|XLMV72 time-stamp module]] for each event as a 64-bit word. The Event Filter parses it as a set of four consecutive 16-bit words.
@@ Line 98: / Line 98: @@
 ==== Trigger packet ====
-The trigger packet includes a bit-pattern word (from the ULM trigger module), with information about what sources triggered the event, and their corresponding time from the Phillips TDC.
+The trigger packet includes a bit-pattern word (encoded  by the [[S800 USB DAQ data format#Tag 0x2367: Trigger module|ULM trigger module]]), with information about what sources triggered the event, and their corresponding time from the [[S800 USB DAQ data format#Tag 0x7186: Phillips 7186 TDC module for time-of-flights|Phillips 7186 TDC]].
   * **Packet Length** (self-inclusive)
-^    from 2 to 7    ^^^^^^^^^^^^^^^|
+^    A number from 2 to 7    ^^^^^^^^^^^^^^^|
 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X |
 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
@@ Line 152: / Line 152: @@
 ==== Time-of-flight packet ====
-The time-of-flight packet includes all the timing values recorded by the Phillips TDC and the XFP-FP and OBJ-FP ToF from the ORTEC TACs.
+The time-of-flight packet includes all the timing values encoded in the [[S800 USB DAQ data format#Tag 0x7186: Phillips 7186 TDC module for time-of-flights|Phillips TDC]] and the XFP-FP and OBJ-FP ToF from the ORTEC TACs encoded in the [[S800 USB DAQ data format#Tag 0x7167: Phillips 7164 ADC module for CRDC anodes (energies and TAC)|S800 Phillips 7164H ADC]].
   * **Packet Length** (self-inclusive)
-^    from 2 to 10    ^^^^^^^^^^^^^^^|
+^    A number from 2 to 10    ^^^^^^^^^^^^^^^|
 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X |
 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
@@ Line 195: / Line 195: @@
 ==== Scintillator packet ====
-The scintillator packet includes the energy (from the FERA LeCroy module) and time (from the Phillips TDC) of the S800 FP scintillator signals. In the original configuration, there were 3 scintillators (E1, E2, and E3) which were later reduced to just one (E1) after the installation of the Hodoscope.
+The scintillator packet includes the energy (encoded in the [[S800 USB DAQ data format#Tag 0x4300: FERA module for plastic scintillator energies|FERA LeCroy module]]) and time (encoded in the [[S800 USB DAQ data format#Tag 0x7186: Phillips 7186 TDC module for time-of-flights|Phillips TDC]]) of the [[Detectors#Plastic scintillators|S800 FP scintillator]] signals. In the original configuration, there were 3 scintillators (E1, E2, and E3) which were later reduced to just one (E1) after the installation of the Hodoscope.
   * **Packet Length** (self-inclusive)
-^    from 4 to 8    ^^^^^^^^^^^^^^^|
+^    A number from 4 to 8    ^^^^^^^^^^^^^^^|
-| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X |
+| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X |
 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
@@ Line 232: / Line 233: @@
+==== Ion-Chamber packet ====
+The Ion-chamber packet includes the energies of the [[Detectors#Ionization chamber|16 ion-chamber segments]] encoded in one of the [[S800 USB DAQ data format#Tag 0x7164: Phillips 7164 ADC module for ion chamber energies|Phillips 7164H ADC]].
+  * **Packet Length** (self-inclusive)
+^    A number from 4 to 18    ^^^^^^^^^^^^^^^|
+| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Packet Tag**
+^    0x5820    ^^^^^^^^^^^^^^^|
+| 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Sub-packet "Energy" Tag**
+^    0x5821    ^^^^^^^^^^^^^^^|
+| 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 1 |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Sub-packet "Energy" Length** (self-inclusive)
+^    from 2 to 16    ^^^^^^^^^^^^^^^|
+| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Energy values**
+The energy (from the Phillips 7164H ADC module) is given by a series of words that look like:
+^  ^^^ Ch ^ energy  ^^^^^^^^^^^|
+| 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+Where Ch is the segment number (from 0 to 15, being segment 0 the most upstream). The Filter gives an energy word for each segment as long as **energy** is greater than 0.
+==== CRDC packets ====
+The Filter provides two CRDC packets: one for [[Detectors|Cathode Readout Drift Chambers (CRDC)|CRDC1]] and one for [[Detectors|Cathode Readout Drift Chambers (CRDC)|CRDC2]]. Each CRDC packet is divided in two sub-packets: the "Raw" sub-packet with information about the pads energies (encoded in the [[S800 USB DAQ data format#Tag 0xCFDC: XLM72V crdc1 pad readout module|CRDCs XLM72 modules]]), and the "Anode" sub-packet with anode energy and time information encoded in the CRDCs [[S800 USB DAQ data format#Tag 0x7167: Phillips 7164 ADC module for CRDC anodes (energies and TAC)|Phillips ADC]]. In the following, we describe the structure of the packet provided by the Filter for each CRDC.
+  * **Packet Length** (self-inclusive)
+^    A number from 4 to 18    ^^^^^^^^^^^^^^^|
+| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Packet Tag**
+^    0x5840    ^^^^^^^^^^^^^^^|
+| 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **CRDC label**
+^    0 (CRDC1) or 1 (CRDC2) ^^^^^^^^^^^^^^^|
+| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **CRDC Sub-packet "Raw" Length** (self-inclusive)
+^    from 2 to 16    ^^^^^^^^^^^^^^^|
+| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **CRDC Sub-packet "Raw" Tag**
+^    0x5841    ^^^^^^^^^^^^^^^|
+| 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 1 |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+CRDC Sub-packet "Raw" CRDC Sub-packet "Raw"
+  * **Energy values**
+The energy (from the Phillips 7164H ADC module) is given by a series of words that look like:
+^  ^^^ Ch ^ energy  ^^^^^^^^^^^|
+| 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+Where Ch is the segment number (from 0 to 15, being segment 0 the most upstream). The Filter gives an energy word for each segment as long as **energy** is greater than 0.
@@ Line 250: / Line 363: @@
 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |

S800 Documentation

User Tools

Site Tools

Differences

Page Tools