S800 Documentation

User Tools

Site Tools

Trace:
event_filter

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
event_filter [2015/10/30 17:31]
pereira [CRDC packets] 		event_filter [2015/10/31 11:31]
pereira [CRDC packets]
Line 3: Line 3:
 The trigger bits words indicates which bits were set during the event. The encoding of the bits is the following: The trigger bits words indicates which bits were set during the event. The encoding of the bits is the following:
  
-In this section, the following diagram will be used to describe a 16-bit word sent by the Filter. The first row includes the value, either in decimal or hexadecimal format, or a descriptive note. The second row shows the value in binary ("X"s are used to describe arbitrary values that vary from event to event). The last row shows the bit number. +In this section, each 16-bit word sent by the Filter is described by a 16x3-table diagram. The first row includes the value, either in decimal or hexadecimal format, or a descriptive note. The second row shows the value in binary ("X"s are used to describe arbitrary values that vary from event to event). The last row shows the bit number. 
  
  
Line 278: Line 278:
 The energy (from the Phillips 7164H ADC module) is given by a series of words that look like:  The energy (from the Phillips 7164H ADC module) is given by a series of words that look like: 
  
-^  ^^^ Ch ^ energy  ^^^^^^^^^^^|+^  ^^^ Ch ^   energy   ^^^^^^^^^^^|
 | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X | X | | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X | X |
 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Line 318: Line 318:
   * **CRDC Sub-packet "Raw" Length** (self-inclusive)   * **CRDC Sub-packet "Raw" Length** (self-inclusive)
  
-^    from 2 to 16    ^^^^^^^^^^^^^^^|+^   A number from 2 to 16    ^^^^^^^^^^^^^^^|
 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X | | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X |
 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
Line 342: Line 342:
  
  
-  * **Samples "packets"** +  * **Samples sub-packets** 
-The Filter sends a series of samples "packets". Each "packet" consists of one 16-bit word, with information about the sample number, followed by four 16-bit words, each with energy information from a pad.+The Filter sends a series of sample sub-packets. Each sub-packet consists of two parts. The first part includes one 16-bit word with information about the **sample** and **channel** numbers:
  
 +^  control bit  ^   sample    ^^^^^^^^^   channel   ^^^^^|
 +| 1 | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
 +| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
  
-^ Control bit ^ sample number ^^^^^^^^ channel number ^^^^^| +where **channel** is a number between 0 and 63, and refers to a group of four pads. The second part includes __up to four__ consecutive 16-bit words, each with a pad energy __greater than 0__: 
-| 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X | X |+ 
 +^  control bit  ^  empty  ^^^  connector  ^^  energy  ^^^^^^^^^| 
 +| 0 | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X |
 | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
 +
 +The **connector** number is related to the pad number (**pad**) according to: **pad** = **channel** + **connector** x 64 (where **connector** ranges from 0 to 3, and **channel** is given by the first word of the sample sub-packet). Note that the Filter processes information from connectors with energies greater than 0. 
 +
 +
 +
 +
 +
 +  * **CRDC Sub-packet "Anode" Length** (self-inclusive)
 +
 +^    4    ^^^^^^^^^^^^^^^|
 +| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 |
 +| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
 +
 +
 +
 +  * **CRDC Sub-packet "Anode" Tag** 
 +
 +^    0x5845    ^^^^^^^^^^^^^^^|
 +| 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 | 1 | 0 | 1 |
 +| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
 +
 +
 +
 +
 +  * **Energy from Anode**
 +The anode energy (encoded in the [[S800 USB DAQ data format#Tag 0x7167: Phillips 7164 ADC module for CRDC anodes (energies and TAC)|S800 Phillips 7164H ADC]]) is given by: 
 +
 +^  empty  ^^^^   energy   ^^^^^^^^^^^|
 +| 0 | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X |
 +| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
 +
 +
 +
 +  * **Time from Anode**
 +The anode time (from an ORTEC TAC encoded in the [[S800 USB DAQ data format#Tag 0x7167: Phillips 7164 ADC module for CRDC anodes (energies and TAC)|S800 Phillips 7164H ADC]]) is given by: 
 +
 +^  empty ^^^^   energy   ^^^^^^^^^^^|
 +| 0 | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X |
 +| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
 +
 +
  
  
-Where Ch is the segment number (from 0 to 15, being segment 0 the most upstream). The Filter gives an energy word for each segment as long as **energy** is greater than 0. 
  
  
event_filter.txt · Last modified: 2019/05/24 13:58 by pereira

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki