This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
event_filter [2015/10/31 13:21] pereira [Intermediate-image PPACs packet] |
event_filter [2015/10/31 13:30] pereira [TPPACs packet] |
||
---|---|---|---|
Line 403: | Line 403: | ||
- | ==== Intermediate-image PPACs packet ==== | + | ==== TPPACs |
The Filter parses and re-formats information from the [[Detectors# | The Filter parses and re-formats information from the [[Detectors# | ||
* **Packet Length** (self-inclusive) | * **Packet Length** (self-inclusive) | ||
- | ^ A number from 10 to 330 | + | ^ A number from 5 to 325 |
| 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | | | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | | ||
| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
Line 462: | Line 462: | ||
The **connector** number is defined between 0 and 3, and it is related to the pad number (**pad**). The value 0 refers to the first 64 pads, and correspond to the strips in the dispersive direction of the first TPPAC. The value 1 is for pads between 63 and 127, and includes the strips in the non-dispersive direction of the first TPPAC. The value 2 corresponds to pads between 128 and 191, which are associated to the strips in the dispersive direction of the second TPPAC. Finally, the value 3 corresponds to pads between 191 to 256, and covers the strips in the non-dispersive direction of the second TPPAC. | The **connector** number is defined between 0 and 3, and it is related to the pad number (**pad**). The value 0 refers to the first 64 pads, and correspond to the strips in the dispersive direction of the first TPPAC. The value 1 is for pads between 63 and 127, and includes the strips in the non-dispersive direction of the first TPPAC. The value 2 corresponds to pads between 128 and 191, which are associated to the strips in the dispersive direction of the second TPPAC. Finally, the value 3 corresponds to pads between 191 to 256, and covers the strips in the non-dispersive direction of the second TPPAC. | ||
- | The value of *pad* is given by **index** + **connector** x 64, where **index** is depends on the value of **channel** and **connector** according to: | + | The value of *pad* is given by **index** + **connector** x 64, where **index** is depends on the value of **channel** and **connector** according to the table below, where the second column shows the index values for **connector**=0 or 2, and the third column corresponds to the index values for **connector**=1 or 3: |
- | ^ channel | + | ^channel^index^index| |
|0|30|0| | |0|30|0| | ||
|1|31|1| | |1|31|1| |