Differences

This shows you the differences between two versions of the page.

--- event_filter [2015/10/31 13:26]
pereira [Intermediate-image PPACs packet]
+++ event_filter [2015/10/31 13:30]
pereira [TPPACs packet]
@@ Line 462: / Line 462: @@
 The **connector** number is defined between 0 and 3, and it is related to the pad number (**pad**). The value 0 refers to the first 64 pads, and correspond to the strips in the dispersive direction of the first TPPAC. The value 1 is for pads between 63 and 127, and includes the strips in the non-dispersive direction of the first TPPAC. The value 2 corresponds to pads between 128 and 191, which are associated to the strips in the dispersive direction of the second TPPAC. Finally, the value 3 corresponds to pads between 191 to 256, and covers the strips in the non-dispersive direction of the second TPPAC.
-The value of *pad* is given by **index** + **connector** x 64, where **index** is depends on the value of **channel** and **connector** according to the following table:
+The value of *pad* is given by **index** + **connector** x 64, where **index** is depends on the value of **channel** and **connector** according to the table below, where the second column shows the index values for **connector**=0 or 2, and the third column corresponds to the index values for **connector**=1 or 3:
-^    channel   ^  connector=0,2  ^ connector=1,3  |
+^channel^index^index|
 |0|30|0|
 |1|31|1|

S800 Documentation