This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
event_filter [2015/10/31 13:26] pereira [Intermediate-image PPACs packet] |
event_filter [2015/11/01 08:11] pereira [Mesytec TDC (MTDC) packet] |
||
---|---|---|---|
Line 283: | Line 283: | ||
- | Where Ch is the segment number (from 0 to 15, being segment 0 the most upstream). The Filter gives an energy word for each segment as long as **energy** is greater than 0. | + | where Ch is the segment number (from 0 to 15, being segment 0 the most upstream). The Filter gives an energy word for each segment as long as **energy** is greater than 0. |
Line 399: | Line 399: | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | ==== Hodoscope packet ==== | ||
+ | The Filter parses the [[Detectors# | ||
+ | [[S800 USB DAQ data format#Tag 0x7165: Phillips 7164 ADC module for hodoscope energies 0 through 15|Phillips 7164 ADCs]] and re-formats the data in three packets, two with the energies of the two groups crystals (from 1 to 16 and from 17 to 32), and the third one with the hit pattern recorded in the [[S800 USB DAQ data format#Tag 0x4448: LeCroy4448 coincidence register module for hodoscope hit pattern|LeCroy 4448 coincidence-register module]]. | ||
+ | |||
+ | Each of the **two first packets** look like: | ||
+ | |||
+ | * **Packet Length** (self-inclusive) | ||
+ | |||
+ | ^ A number from 3 to 19 ^^^^^^^^^^^^^^^| | ||
+ | | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | |||
+ | * **Packet Tag** | ||
+ | |||
+ | ^ 0x58B0 | ||
+ | | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | |||
+ | * **Hodoscope Sub-packet " | ||
+ | |||
+ | |||
+ | ^ 0x0000 or 0x0001 | ||
+ | | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | where 0x0000 labels the energy sub-packet of the first group of crystals from 1 to 16, and 0x00001 labels the second group of crystals from 17 to 32. | ||
+ | |||
+ | |||
+ | |||
+ | * **Energy values** | ||
+ | The energy from each of the two Phillips 7164H ADC modules is given by a series of words that look like: | ||
+ | |||
+ | ^ ^^^ Ch ^ | ||
+ | | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X | X | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | |||
+ | where Ch is the crystal number in the packet (from 0 to 15). The Filter gives an energy word for each crystal as long as **energy** is greater than 0. | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | The **third hodoscope packet** with information from the coincidence register looks like: | ||
+ | |||
+ | * **Packet Length** (self-inclusive) | ||
+ | |||
+ | ^ 5 ^^^^^^^^^^^^^^^| | ||
+ | | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 1 | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | |||
+ | * **Packet Tag** | ||
+ | |||
+ | ^ 0x58B0 | ||
+ | | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | |||
+ | * **Hit pattern** | ||
+ | |||
+ | |||
+ | ^ hit pattern of first 16 crystals | ||
+ | | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | |||
+ | |||
+ | ^ hit pattern of crystals 16 to 32 | ||
+ | | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | |||
+ | |||
+ | * **Time** | ||
+ | The Hodoscope OR time (from an ORTEC TAC encoded in the [[S800 USB DAQ data format#Tag 0x7167: Phillips 7164 ADC module for CRDC anodes (energies and TAC)|S800 Phillips 7164H ADC]]) is given by: | ||
+ | |||
+ | ^ empty ^^^^ | ||
+ | | 0 | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
Line 462: | Line 548: | ||
The **connector** number is defined between 0 and 3, and it is related to the pad number (**pad**). The value 0 refers to the first 64 pads, and correspond to the strips in the dispersive direction of the first TPPAC. The value 1 is for pads between 63 and 127, and includes the strips in the non-dispersive direction of the first TPPAC. The value 2 corresponds to pads between 128 and 191, which are associated to the strips in the dispersive direction of the second TPPAC. Finally, the value 3 corresponds to pads between 191 to 256, and covers the strips in the non-dispersive direction of the second TPPAC. | The **connector** number is defined between 0 and 3, and it is related to the pad number (**pad**). The value 0 refers to the first 64 pads, and correspond to the strips in the dispersive direction of the first TPPAC. The value 1 is for pads between 63 and 127, and includes the strips in the non-dispersive direction of the first TPPAC. The value 2 corresponds to pads between 128 and 191, which are associated to the strips in the dispersive direction of the second TPPAC. Finally, the value 3 corresponds to pads between 191 to 256, and covers the strips in the non-dispersive direction of the second TPPAC. | ||
- | The value of *pad* is given by **index** + **connector** x 64, where **index** is depends on the value of **channel** and **connector** according to the following | + | The value of **pad** is given by **index** + **connector** x 64, where **index** is depends on the value of **channel** and **connector** according to the table below, where the second column shows the index values for **connector**=0 or 2, and the third column corresponds to the index values for **connector**=1 or 3: |
- | ^ channel | + | ^channel^index^index| |
|0|30|0| | |0|30|0| | ||
|1|31|1| | |1|31|1| | ||
Line 531: | Line 617: | ||
+ | |||
+ | |||
+ | |||
+ | ==== Mesytec TDC (MTDC) packet ==== | ||
+ | The MTDC packet includes the multiple timing values [[S800 USB DAQ data format# | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | |||
+ | all the timing values encoded in the [[S800 USB DAQ data format#Tag 0x7186: Phillips 7186 TDC module for time-of-flights|Phillips TDC]] and the XFP-FP and OBJ-FP ToF from the ORTEC TACs encoded in the [[S800 USB DAQ data format#Tag 0x7167: Phillips 7164 ADC module for CRDC anodes (energies and TAC)|S800 Phillips 7164H ADC]]. | ||
+ | |||
+ | |||
+ | * **Packet Length** (self-inclusive) | ||
+ | |||
+ | ^ A number from 2 to 10 ^^^^^^^^^^^^^^^| | ||
+ | | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | |||
+ | * **Packet Tag** | ||
+ | |||
+ | ^ 0x5802 | ||
+ | | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | |||
+ | * **Time-of-flight values** | ||
+ | The time-of-flight information for each channel is coded in words that look like: | ||
+ | |||
+ | ^ ^^^ Ch ^ time ^^^^^^^^^^^| | ||
+ | | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X | X | | ||
+ | | 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | | ||
+ | |||
+ | Up to eight of these words can be present (depending on wheter **time** is greater than 0): six from the Phillips TDC, and two from the XFP-FP and OBJ-FP TACs. The channel number Ch is given by: | ||
+ | |||
+ | ^ Ch ^ Source | ||
+ | | 6 | Phillips TDC time from the A1900 IM2 north scintillator (optional) | ||
+ | | 7 | Phillips TDC time from the A1900 IM2 south scintillator (optional) | ||
+ | | 12 | Phillips TDC time from the RF | | ||
+ | | 13 | Phillips TDC time from the OBJ scintillator | ||
+ | | 14 | Phillips TDC time from the XFP scintillator | ||
+ | | 15 | Phillips TDC time from the LaBr (optional) | ||
+ | | 4 | XFP-FP time-of-flight from TAC | | ||
+ | | 5 | OBJ-FP time-of-flight from TAC | | ||
+ | |||
+ | |||
+ | Note that the time values from the Phillips TDC are subtracted by SpecTcl to the time from the S800 trigger E1 up (encoded in the [[#trigger packet|trigger packet]]) in order to calculate the corresponding time-of-flight. On the other hand, the times from the TACs (Ch 4 and 5) correspond to actual time-of-flight values. | ||