Differences

This shows you the differences between two versions of the page.

--- event_filter [2015/10/31 13:30]
pereira [TPPACs packet]
+++ event_filter [2015/10/31 17:13]
pereira [Hodoscope packet]
@@ Line 283: / Line 283: @@
-Where Ch is the segment number (from 0 to 15, being segment 0 the most upstream). The Filter gives an energy word for each segment as long as **energy** is greater than 0.
+where Ch is the segment number (from 0 to 15, being segment 0 the most upstream). The Filter gives an energy word for each segment as long as **energy** is greater than 0.
@@ Line 395: / Line 395: @@
+==== Hodoscope packet ====
+The Filter parses the [[Detectors#Hodoscope|Hodoscope]] information encoded in the two
+[[S800 USB DAQ data format#Tag 0x7165: Phillips 7164 ADC module for hodoscope energies 0 through 15|Phillips 7164 ADCs]] and re-formats the data in three packets, two with the energies of the two groups crystals (from 1 to 16 and from 17 to 32), and the third one with the hit pattern recorded in the [[S800 USB DAQ data format#Tag 0x4448: LeCroy4448 coincidence register module for hodoscope hit pattern|LeCroy 4448 coincidence-register module]].
+Each of the two first packets look like:
+  * **Packet Length** (self-inclusive)
+^    A number from 5 to 325    ^^^^^^^^^^^^^^^|
+| 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Packet Tag**
+^    0x58B0    ^^^^^^^^^^^^^^^|
+| 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Hodoscope Sub-packet "Energy" Tag**
+^    0x0000 or 0x0001    ^^^^^^^^^^^^^^^|
+| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+where 0x0000 labels the energy sub-packet of the first group of crystals from 1 to 16, and 0x00001 labels the second group of crystals from 17 to 32.
+  * **Energy values**
+The energy from each of the two Phillips 7164H ADC modules is given by a series of words that look like:
+^  ^^^ Ch ^   energy   ^^^^^^^^^^^|
+| 0 | 0 | 0 | X | X | X | X | X | X | X | X | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+where Ch is the crystal number in the packet (from 0 to 15). The Filter gives an energy word for each segment as long as **energy** is greater than 0.
+The third hodoscope packet with information from the coincidence register looks like:
+  * **Packet Length** (self-inclusive)
+^    A number from 5 to 325    ^^^^^^^^^^^^^^^|
+| 0 | 0 | 0 | 0 | 0 | 0 | 0 | X | X | X | X | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Packet Tag**
+^    0x58B0    ^^^^^^^^^^^^^^^|
+| 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 1 | 0 | 1 | 1 | 0 | 0 | 0 | 0 |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Hit pattern**
+^    hit pattern of first 16 crystals   ^^^^^^^^^^^^^^^|
+| X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+^    hit pattern of crystals 16 to 32   ^^^^^^^^^^^^^^^|
+| X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+  * **Time**
+The last word carries information from the ORTEC TAC
+^    hit pattern of first 16 crystals   ^^^^^^^^^^^^^^^|
+| X | X | X | X | X | X | X | X | X | X | X | X | X | X | X | X |
+| 15 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
+where 0x0000 labels the energy sub-packet of the first group of crystals from 1 to 16, and 0x00001 labels the second group of crystals from 17 to 32.
@@ Line 462: / Line 560: @@
 The **connector** number is defined between 0 and 3, and it is related to the pad number (**pad**). The value 0 refers to the first 64 pads, and correspond to the strips in the dispersive direction of the first TPPAC. The value 1 is for pads between 63 and 127, and includes the strips in the non-dispersive direction of the first TPPAC. The value 2 corresponds to pads between 128 and 191, which are associated to the strips in the dispersive direction of the second TPPAC. Finally, the value 3 corresponds to pads between 191 to 256, and covers the strips in the non-dispersive direction of the second TPPAC.
-The value of *pad* is given by **index** + **connector** x 64, where **index** is depends on the value of **channel** and **connector** according to the table below, where the second column shows the index values for **connector**=0 or 2, and the third column corresponds to the index values for **connector**=1 or 3:
+The value of **pad** is given by **index** + **connector** x 64, where **index** is depends on the value of **channel** and **connector** according to the table below, where the second column shows the index values for **connector**=0 or 2, and the third column corresponds to the index values for **connector**=1 or 3:
 ^channel^index^index|

S800 Documentation

User Tools

Site Tools

Differences

Page Tools