User Tools

Site Tools


gas_handling_system

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revision Both sides next revision
gas_handling_system [2013/12/13 21:38]
pereira [LabView Control Program]
gas_handling_system [2013/12/14 16:10]
pereira [General Information]
Line 3: Line 3:
 ===== General Information ===== ===== General Information =====
 Required controls and monitoring Required controls and monitoring
-  * LabView gas handling system application +  * **LabView gas handling system** application 
-  * PanelMate S800vac.MT2 page 07: Focal Plane Detector+  * PanelMate **S800vac.MT2 page 07**: Focal Plane Detector
  
-The gas handling systems for both Focal Plane gas-filled detectors – the Ion Chamber and the CRDCs – are remotely controlled via a single LabView application running on the computer S800FP-PC in the S3 vault. This computer can be accessed remotely via the devop1 computer in Data-U6.+The gas handling systems for both Focal Plane gas-filled detectors – the [[Detectors#Ionization Chamber|Ionization Chamber]] and the [[Detectors#Cathode Readout Drift Chambers (CRDC)|CRDCs]] – are remotely controlled via a single LabView application running on the computer [[Software|S800FP-PC]] in the S3 vault. This computer can be accessed remotely via the [[Software|devop1]] computer in data-U6.
  
 Note that since the same roughing pump drives the gas handling systems for both gas-filled detectors, extra precautions must be taken to protect one detector from the pressure of the other detector. The fact that the same pump drives both systems is not indicated on the graphics for the LabView control application Note that since the same roughing pump drives the gas handling systems for both gas-filled detectors, extra precautions must be taken to protect one detector from the pressure of the other detector. The fact that the same pump drives both systems is not indicated on the graphics for the LabView control application
Line 25: Line 25:
   * Once both detectors are empty, this application can be closed with the “X” button on the upper right corner of the window.   * Once both detectors are empty, this application can be closed with the “X” button on the upper right corner of the window.
  
-{{:wiki:GasHandlingSystem-panel.jpg?1000|Labview control panel of the gas handling system}} +{{:wiki:GasHandlingSystem-panel.jpg?800|Labview control panel of the gas handling system}} 
  
  
gas_handling_system.txt · Last modified: 2023/05/11 11:29 by pereira