gas_handling_system
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
gas_handling_system [2013/12/26 14:49] pereira [In Data-U6] |
gas_handling_system [2013/12/26 14:49] pereira [In the S3 vault] |
||
|---|---|---|---|
| Line 40: | Line 40: | ||
| * The pump sits on the floor under the focal plane behind the south support post | * The pump sits on the floor under the focal plane behind the south support post | ||
| * The display unit for the pressure at the pump has a needle indicator and is mounted under the focal plane on the south support post | * The display unit for the pressure at the pump has a needle indicator and is mounted under the focal plane on the south support post | ||
| - | * Ensure that the main valves on the gas bottles are open | + | * Ensure that the main valves on the gas bottles are open (see pictures below) |
| * Ensure that the gas bottles are not empty | * Ensure that the gas bottles are not empty | ||
| * The gas regulators are not normally adjusted. They should all be set to provide a pressure around 20 psi. | * The gas regulators are not normally adjusted. They should all be set to provide a pressure around 20 psi. | ||
gas_handling_system.txt ยท Last modified: 2023/05/11 11:29 by pereira
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
