Differences

This shows you the differences between two versions of the page.

--- gas_handling_system [2014/11/18 11:19]
pereira
+++ gas_handling_system [2014/11/19 11:14]
pereira [Tracking Gas bottles pressures]
@@ Line 54: / Line 54: @@
   * Follow instructions under [[#Preparation of Gas bottles|Preparation of Gas bottles]]
-  * Monitor the pressure of the focal plane vacuum chamber (as read out via the I264IG ion gauge in PanelMate **S800vac.MT2 page 07**) while detectors are being filled with gas; the pressure normally stays below 5E-5 Torr.
+  * Monitor the pressure of the focal plane vacuum chamber (as read out via the I264IG ion gauge in PanelMate **S800vac.ui page 07**) while detectors are being filled with gas; the pressure normally stays below 5E-5 Torr.
   * Confirm that the detector pressure as indicated by the display labeled P.T. #1 reads below a couple of Torr
@@ Line 151: / Line 151: @@
 ===== Tracking Gas bottles pressures =====
+In order to track the status of the gas bottles for the [[Detectors#Ionization Chamber|ionization chamber]], the  [[Detectors#Cathode Readout Drift Chambers (CRDC)|CRDCs]], and the [[Detectors#[Tracking Parallel Plate Avalanche Counters (TPPAC)]|TPPAC]], it is possible to monitor their remaining pressures from Barney. Just open the **A1900** page, then **Tools**, and then **Gas Status**. The following window will be displayed:
-**NEEDS TO BE COMPLETED**
+{{:wiki:gas-bottles-status.jpg?900|Barney display of pressures of all "supported" gas detectors in the lab}}

S800 Documentation