Differences

This shows you the differences between two versions of the page.

--- gas_handling_system [2017/01/22 16:56]
pereira [Tracking Gas bottles pressures]
+++ gas_handling_system [2017/01/22 16:59]
pereira
@@ Line 8: / Line 8: @@
   * [[#Removing Gas from Focal Plane Detectors]]
   * [[#Tracking Gas bottles pressures|Tracking Gas bottles pressures from Barney]]
-  * [[#Replacing gas bottles]]
+  * [[#Replacing Gas bottles]]
 ===== General Information =====
 Required controls and monitoring
@@ Line 158: / Line 159: @@
   * Enter S3 vault and close main valves on [[#Preparation of gas bottles|gas bottles]]: P-10 for the [[Detectors#Ionization Chamber|ionization chamber]] (C<sub>4</sub>H<sub>10</sub>) and CF<sub>4</sub> (tetrafluoromethane) for the [[Detectors#Cathode Readout Drift Chambers (CRDC)|CRDCs]]
-===== Replacing gas bottles =====
+===== Tracking Gas bottles pressures =====
+In order to track the status of the gas bottles for the [[Detectors#Ionization Chamber|ionization chamber]], the  [[Detectors#Cathode Readout Drift Chambers (CRDC)|CRDCs]], and the [[Detectors#[Tracking Parallel Plate Avalanche Counters (TPPAC)]|TPPAC]], it is possible to monitor their remaining pressures from Barney. Just open the **A1900** page, then **Tools**, and then **Gas Status**. The following window will be displayed:
+{{:wiki:gas-bottles-status.jpg?900|Barney display of pressures of all "supported" gas detectors in the lab}}
+===== Replacing Gas bottles =====
+In preparation

S800 Documentation