gas_handling_system
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
|
gas_handling_system [2017/01/31 12:04] pereira [Filling Ion Chamber with Gas] |
gas_handling_system [2017/01/31 12:18] pereira [Filling Ion Chamber with Gas] |
||
|---|---|---|---|
| Line 81: | Line 81: | ||
| * Click button labeled **Return to AUTO Mode** on left to start filling/ | * Click button labeled **Return to AUTO Mode** on left to start filling/ | ||
| * Click the **Valves** tab at the top of the LabView window to return to the overview display of the gas handling system to monitor filling. The flow readings for MFC #1 will increase and eventually disappear as the readout value overflows the display field (this is normal behavior) | * Click the **Valves** tab at the top of the LabView window to return to the overview display of the gas handling system to monitor filling. The flow readings for MFC #1 will increase and eventually disappear as the readout value overflows the display field (this is normal behavior) | ||
| - | * If necessary, the filling process can be stopped at any time by pressing the valve button labeled **Close MFC #1** | ||
| * Open **valve 9** | * Open **valve 9** | ||
| + | * If necessary, the filling process can be stopped at any time by pressing the valve button labeled **Close MFC #1** | ||
| * The filling process will take several minutes | * The filling process will take several minutes | ||
| Line 116: | Line 116: | ||
| * Click button labeled **AUTO Mode** on left to start filling/ | * Click button labeled **AUTO Mode** on left to start filling/ | ||
| * Click the **Valves** tab at the top of the LabView window to return to the overview display of the gas handling system to monitor filling. The flow readings for MFC #2 and MFC #3 will increase. The LabView application controls the gas mixing ratio based on the flow ratio (scaled with a calibration constant) | * Click the **Valves** tab at the top of the LabView window to return to the overview display of the gas handling system to monitor filling. The flow readings for MFC #2 and MFC #3 will increase. The LabView application controls the gas mixing ratio based on the flow ratio (scaled with a calibration constant) | ||
| + | * Open **valve 25** | ||
| * If necessary, the filling process can be stopped at any time by pressing the valve button labeled **Close MFCs #2 & #3** | * If necessary, the filling process can be stopped at any time by pressing the valve button labeled **Close MFCs #2 & #3** | ||
| - | * Open **valve 25** | ||
| * The filling process will take several minutes | * The filling process will take several minutes | ||
gas_handling_system.txt ยท Last modified: 2023/05/11 11:29 by pereira
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
