gas_handling_system
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
gas_handling_system [2017/06/07 13:13] pereira [Removing Gas from Focal Plane Detectors] |
gas_handling_system [2017/06/07 13:15] pereira |
||
|---|---|---|---|
| Line 50: | Line 50: | ||
| * The display unit for the pressure at the pump has a needle indicator and is mounted under the [[Stations# | * The display unit for the pressure at the pump has a needle indicator and is mounted under the [[Stations# | ||
| * Ensure that the main valves on the gas bottles are open (see pictures below) | * Ensure that the main valves on the gas bottles are open (see pictures below) | ||
| + | * Open valves downstream of regulators in each bottle | ||
| * Ensure that the gas bottles are not empty | * Ensure that the gas bottles are not empty | ||
| * The gas regulators are not normally adjusted. They should all be set to provide a pressure around 20 psi | * The gas regulators are not normally adjusted. They should all be set to provide a pressure around 20 psi | ||
gas_handling_system.txt ยท Last modified: 2023/05/11 11:29 by pereira
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
