Differences

This shows you the differences between two versions of the page.

--- installation_fp_sci [2015/05/04 12:43]
pereira [Installation of FP scintillator]
+++ installation_fp_sci [2015/05/04 12:47]
pereira [Installation of FP scintillator]
@@ Line 19: / Line 19: @@
 ==== Installation of FP scintillator ====
   - The figure below shows the FP chamber open, with the "old" FP scintillator to be replaced by the new one {{:wiki:E1-view.jpg?350|FP chamber opened}}
-  - Unplug the bases of the up and down phototubes. The tie holding the cable of the up phototube needs to be cut
+  - Unplug the bases of the up and down phototubes. The platic tie holding the cable of the up phototube to the chamber needs to be cut
-{{:wiki:e1-up-Daniel.jpg?350|UP base phototube}}{{:wiki:e1-down-closeup.jpg?250|DOWN base phototube}}
+{{:wiki:e1-up-Daniel.jpg?400|UP base phototube}}   {{:wiki:e1-down-closeup.jpg?250|DOWN base phototube}}
+  - Unscrew the two bolts holding the scintillator frame to the chamber                                 {{:wiki:e1-frame-bolts.jpg?350|Scintillator frame}}
 he first step to do is unplugging the up and down bases of the phototubes

S800 Documentation