installation_fp_sci
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
installation_fp_sci [2015/05/04 12:51] pereira [Installation of FP scintillator] |
installation_fp_sci [2015/05/04 12:55] pereira [Installation of FP scintillator] |
||
|---|---|---|---|
| Line 22: | Line 22: | ||
| - Using an allen wrench, unscrew the two bolts attaching the scintillator frame to the base of the chamber {{: | - Using an allen wrench, unscrew the two bolts attaching the scintillator frame to the base of the chamber {{: | ||
| - Climb to the chamber and pull the scintillator frame up. Once unplugged, handle it to a second person {{: | - Climb to the chamber and pull the scintillator frame up. Once unplugged, handle it to a second person {{: | ||
| + | - With the help of a second person, hold the new scintillator by its frame and place it in the right spot. A second person should be ready to screw the frame to the base of the chamber | ||
| + | - Connect the bases of the up and down phototubes. The later is quite difficult because one cannot see the pins | ||
| + | - Using a plastic tie, attach the cable of the up phototube to the scintillator frame | ||
| + | - | ||
| + | |||
| he first step to do is unplugging the up and down bases of the phototubes | he first step to do is unplugging the up and down bases of the phototubes | ||
installation_fp_sci.txt ยท Last modified: 2023/08/18 10:19 by noji
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
