installation_fp_sci
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
installation_fp_sci [2023/07/12 09:57] noji [Venting FP Chamber] |
installation_fp_sci [2023/08/17 12:39] pereira [Emptying Detectors] |
||
|---|---|---|---|
| Line 21: | Line 21: | ||
| - The IC vessel has a much larger quantity of gas compared to the CRDC vessel. In order to pump them out at a similar speed go to the “FP_State_Buttons” page and go to the D2708 (Ion Chamber) tab. Click **EMPTY**. This will more rapidly pump down the IC vessel. Both vessels should be emptied at about the same time. | - The IC vessel has a much larger quantity of gas compared to the CRDC vessel. In order to pump them out at a similar speed go to the “FP_State_Buttons” page and go to the D2708 (Ion Chamber) tab. Click **EMPTY**. This will more rapidly pump down the IC vessel. Both vessels should be emptied at about the same time. | ||
| - Open a data browser and plot the PVs for PT1 (S800_GHS: | - Open a data browser and plot the PVs for PT1 (S800_GHS: | ||
| - | - Wait for PT1 and PT2 to read < 2 Torr. This should take about 30 minutes. | + | - Wait for PT1 and PT2 to read < 0.5 Torr. This should take about 30 minutes. |
| - Open the Focal Plane VAC D2686 page (FRIB EXP Main → S800 → Vacuum Main → Focal Plane). | - Open the Focal Plane VAC D2686 page (FRIB EXP Main → S800 → Vacuum Main → Focal Plane). | ||
| - Ensure the beamline gate valve to the FP chamber is closed (BGV_D2671). | - Ensure the beamline gate valve to the FP chamber is closed (BGV_D2671). | ||
installation_fp_sci.txt · Last modified: 2023/08/18 10:19 by noji
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
