Differences

This shows you the differences between two versions of the page.

--- magnetic-rigidity_setting [2013/12/21 08:40]
pereira
+++ magnetic-rigidity_setting [2014/11/13 10:25]
pereira
@@ Line 8: / Line 8: @@
-THIS FIGURE IS OBSOLETE. NEW A NEWER VERSION
+{{:wiki:barney_s800.png?850|Barney display for the S800.}}
-{{:wiki:barney_magnets.jpg?700|Barney display for the S800.}}
+We strongly recommend Barney printouts after every change of the spectrograph. This not only provides a paper copy of all magnet settings from segment 0 to segment 8 but also saves this information in ascii format on disk (accessible via the A1900 web site under [[https://groups.nscl.msu.edu/a1900/archive/barney/|Beam Line Savesets]]). If an [[Determination of Angles and Momentum#Calculation of the inverse map|inverse map]] is desired for the tracking of the particles in the spectrograph, segment 8 Brho and the magnet currents of the dipoles and quadrupoles are needed to determine important input parameters for the calculation.
-We strongly recommend Barney printouts after every change of the spectrograph. This not only provides a paper copy of all magnet settings from segment 0 to segment 8 but also saves this information in ascii format on disk (accessible via the A1900 web site under [[https://groups.nscl.msu.edu/a1900/archive/barney/|Beam Line Savesets]]). If an [[Calculation of the inverse map|inverse map]] is desired for the tracking of the particles in the spectrograph, segment 8 Brho and the magnet currents of the dipoles and quadrupoles are needed to determine important input parameters for the calculation.

S800 Documentation

User Tools

Site Tools

Differences

Page Tools