magnetic-rigidity_setting
Differences
This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
|
Next revision
Both sides next revision
|
magnetic-rigidity_setting [2014/11/13 10:25] pereira |
magnetic-rigidity_setting [2014/11/13 10:48] pereira |
| |
=== Segments 6 and 7 (S800 Analysis line) === | === Segments 6 and 7 (S800 Analysis line) === |
The magnetic rigidity ("Brho") of the segments 6 and 7 ([[Introduction#Analysis Line|analysis beam line]]) of the S800 Barney page displayed below will be set during the secondary-beam tuning (SDT) in cooperation with the [[https://groups.nscl.msu.edu/a1900|A1900 group]]. The energy loss in all detector systems ([[Detectors#Plastic scintillators|object scintillator]], object PIN, [[Detectors#Tracking Parallel Plate Avalanche Counters (TPPAC)|tracking PPACs]]) operating in the [[Introduction#Analysis Line|analysis beam line]] has to be considered for the Brho setting. This requires the knowledge of the beam Brho at the exit of the [[https://groups.nscl.msu.edu/a1900|A1900]], which is typically calculated with the program [[http://lise.nscl.msu.edu/lise.html|LISE++]] (follow this [[https://groups.nscl.msu.edu/a1900/software/lise++/|instructions]] and/or ask the [[https://groups.nscl.msu.edu/a1900|A1900 group]] for assistance). In the course of secondary-beam tuning, a scintillating target ("viewer") and camera setup at the target position of the S800 might be requested by the [[https://groups.nscl.msu.edu/a1900|A1900 group]]. | The magnetic rigidity ("Brho") of segments 6 and 7 ([[Introduction#Analysis Line|analysis beam line]]) of the S800 Barney page displayed below will be set during the secondary-beam tuning (SDT) in cooperation with the [[https://groups.nscl.msu.edu/a1900|A1900 group]]. The energy loss in all detector systems ([[Detectors#Plastic scintillators|object scintillator]], object PIN, [[Detectors#Tracking Parallel Plate Avalanche Counters (TPPAC)|tracking PPACs]]) operating in the [[Introduction#Analysis Line|analysis beam line]] has to be considered for the Brho setting. This requires the knowledge of the beam Brho at the exit of the [[https://groups.nscl.msu.edu/a1900|A1900]], which is typically calculated with the program [[http://lise.nscl.msu.edu/lise.html|LISE++]] (follow this [[https://groups.nscl.msu.edu/a1900/software/lise++/|instructions]] and/or ask the [[https://groups.nscl.msu.edu/a1900|A1900 group]] for assistance). In the course of secondary-beam tuning, a scintillating target ("viewer") and camera setup at the target position of the S800 might be requested by the [[https://groups.nscl.msu.edu/a1900|A1900 group]]. |
| |
=== Segment 8 (S800 Spectrograph) === | === Segment 8 (S800 Spectrograph) === |
magnetic-rigidity_setting.txt ยท Last modified: 2023/09/22 11:25 by swartzj