Differences

This shows you the differences between two versions of the page.

--- nmr_probes [2023/06/09 14:27]
swartzj
+++ nmr_probes [2023/06/09 14:28]
swartzj
@@ Line 21: / Line 21: @@
   $ /usr/bin/wish /srv/s3-nmr/spectrograph/spectrograph.tcl
-Now press start on the GUI and you should see a field reading. Sometimes the initialization of these applications fail. In that case check section [[nmr probes#troubleshooting|"Troubleshooting"]] below). The picture below shows the NMR panel for the S800 Analysis Line GUI as an example. The top (yellow) panel shows the data relevant to the NMR module, the middle (pink) the digitized signal from the oscilloscope and the bottom (blue) the status and measurements for the dipoles.
+Now press start on the GUI, which is shown below, and you should see a field reading. Sometimes the initialization of these applications fail. In that case check section [[nmr probes#troubleshooting|"Troubleshooting"]] below). The picture below shows the NMR panel for the S800 Analysis Line GUI as an example. The top (yellow) panel shows the data relevant to the NMR module, the middle (pink) the digitized signal from the oscilloscope and the bottom (blue) the status and measurements for the dipoles.
 {{:wiki:NMR-control.jpg?350|NMR Control panel for the Analysis line dipoles.}}

S800 Documentation