Differences

This shows you the differences between two versions of the page.

--- s800_daq_tools [2015/08/31 10:05]
pereira [S800 Software tools]
+++ s800_daq_tools [2015/10/19 12:59]
pereira [Troubleshooting]
@@ Line 61: / Line 61: @@
 ==== Troubleshooting ====
-In the rare case that the RunControl GUI gets "frozen", it is possible to reboot the whole system manually. This operation requires to turn off the VME and CAMAC crates, and the spdaq48 computer, all them located in the rack seating near the FP box in the S3 vault. Then, the system must be turned back on in the following order. First, CAMAC crate, second VME crate, and third spdaq48.
+In the rare case that the RunControl GUI gets "frozen", it is possible to reboot the whole system manually. This operation requires to turn off the VME and CAMAC crates, and the spdaq computer, all them located in the rack seating near the FP box in the S3 vault. Then, the system must be turned back on in the following order. First, CAMAC crate, second VME crate, and third spdaq.
 ===== S800 DAQ status tool =====
 In order to remotely monitor the status of the S800 DAQ, a tool has been created which can show statistics and current information about the present running instances of the Readout GUI and eventbuilder programs. This is accessed by the following:

S800 Documentation