Differences

This shows you the differences between two versions of the page.

--- s800_daq_tools [2016/02/29 11:51]
pereira [Controls tab]
+++ s800_daq_tools [2016/02/29 11:51]
pereira [S800 DAQ status tool]
@@ Line 94: / Line 94: @@
 ==== Troubleshooting ====
 In the rare case that the RunControl GUI gets "frozen", it is possible to reboot the whole system manually. This operation requires to turn off the VME and CAMAC crates, and the spdaq computer, all them located in the rack seating near the FP box in the S3 vault. Then, the system must be turned back on in the following order. First, CAMAC crate, second VME crate, and third spdaq.
-===== S800 DAQ status tool =====
-In order to remotely monitor the status of the S800 DAQ, a tool has been created which can show statistics and current information about the present running instances of the Readout GUI and eventbuilder programs. This is accessed by the following:
-. On spdaq48 do:
-**/user/s800/operations/daq/usb/s800status/comms**
-which will open the status GUI.
-There are tabs for connections to the Readout GUI, the eventbuilder and a controls tab.
 ==== Readout GUI tab ====

S800 Documentation