Differences

This shows you the differences between two versions of the page.

--- s800_daq_tools [2016/02/29 11:51]
pereira [Controls tab]
+++ s800_daq_tools [2016/02/29 11:51]
pereira [Readout GUI tab]
@@ Line 94: / Line 94: @@
 ==== Troubleshooting ====
 In the rare case that the RunControl GUI gets "frozen", it is possible to reboot the whole system manually. This operation requires to turn off the VME and CAMAC crates, and the spdaq computer, all them located in the rack seating near the FP box in the S3 vault. Then, the system must be turned back on in the following order. First, CAMAC crate, second VME crate, and third spdaq.
-===== S800 DAQ status tool =====
-In order to remotely monitor the status of the S800 DAQ, a tool has been created which can show statistics and current information about the present running instances of the Readout GUI and eventbuilder programs. This is accessed by the following:
-. On spdaq48 do:
-**/user/s800/operations/daq/usb/s800status/comms**
-which will open the status GUI.
-There are tabs for connections to the Readout GUI, the eventbuilder and a controls tab.
-==== Readout GUI tab ====
-The communications port to the Readout GUI is tcp:7999 and it runs by default on spdaq48. These options are selected by default in the server and port drop down boxes, but other values can be entered here by hand. Clicking "Get Status" will connect to this server/port combination and attempt to fill in the Run Info section with the returned information. The status will also be updated.
-{{:wiki:comms.png?500|S800 Status GUI}}

S800 Documentation