Differences

This shows you the differences between two versions of the page.

--- s800_daq_tools [2016/02/29 11:52]
pereira [Eventbuilder tab]
+++ s800_daq_tools [2016/02/29 13:07]
pereira [Troubleshooting]
@@ Line 2: / Line 2: @@
   * [[#Running the S800 DAQ]]
-    * [[#Run Control Window]]
+    * [[#Readout GUI]]
-    * [[#EventBuilder Window]]
     * [[#Mesytec CFD GUI]]
     * [[#Delay Window]]
     * [[#Trigger GUI]]
     * [[#Scaler Display]]
-    * [[#Troubleshooting]]
+  * [[#Troubleshooting]]
-  * [[#S800 DAQ status tool]]
-    * [[#Readout GUI tab]]
-    * [[#Eventbuilder tab]]
-    * [[#Controls tab]]
   * [[#How to run combined S800 + GRETINA]]
@@ Line 92: / Line 87: @@
-==== Troubleshooting ====
+===== Troubleshooting =====
+==== Manual rebooting ====
 In the rare case that the RunControl GUI gets "frozen", it is possible to reboot the whole system manually. This operation requires to turn off the VME and CAMAC crates, and the spdaq computer, all them located in the rack seating near the FP box in the S3 vault. Then, the system must be turned back on in the following order. First, CAMAC crate, second VME crate, and third spdaq.
@@ Line 98: / Line 95: @@
 ===== How to run combined S800 + GRETINA =====
+OBSOLETE. Documentation is currently under development.
 In order to run the combined S800 + Gretina daq, the following steps need to be taken:

S800 Documentation