Differences

This shows you the differences between two versions of the page.

--- s800_daq_tools [2017/06/16 18:23]
pereira old revision restored (2017/06/16 18:18)
+++ s800_daq_tools [2017/06/16 18:48]
pereira [Running in Slave mode with multilogger]
@@ Line 98: / Line 98: @@
 {{:wiki:Scalers.jpg?700|Scaler Display}}
+==== Running in Slave mode with multilogger ====
+The S800 DAQ can be run in Standalone mode (as described above), or in Slave mode. The later means that the S800 DAQ is controlled by an external DAQ (e.g. GRETINA). In this mode, the S800 ULM receives an external clock signal and external synchronization from the master DAQ. Running in Slave mode requires to change the script **CC0105Begin.tcl** in directory **/user/s800/converged_daq/Scripts**. In this file, there are two variables ''extsynch'' and ''extclock'' to define if the external synchronization and clock signals are enabled (=1) or disabled (=0). Make sure that you set these variables to 1 if you want to run in Slave mode.
+One of the
+{{:wiki:multilogger.png|Multilogger window}}

S800 Documentation