S800 Documentation

User Tools

Site Tools

Trace:
s800_daq_tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
s800_daq_tools [2023/09/22 13:01]
swartzj 		s800_daq_tools [2023/09/22 14:02]
swartzj [Mesytec CFD GUI]
Line 41: Line 41:
 The S800 electronics includes a Mesytec CFD (MCFD), used to "filter" the detector signals going to the Scaler and Mesytec TDC. The configuration parameters of the CFD (thresholds, delays, fraction, etc.) can be remotely adjusted via a MCFD GUI developed by the NSCL DAQ group. During tuning of the S800, one typically needs to adjust thresholds only. The S800 electronics includes a Mesytec CFD (MCFD), used to "filter" the detector signals going to the Scaler and Mesytec TDC. The configuration parameters of the CFD (thresholds, delays, fraction, etc.) can be remotely adjusted via a MCFD GUI developed by the NSCL DAQ group. During tuning of the S800, one typically needs to adjust thresholds only.
  
-The MCFD GUI can be started in three different ways: 1) by clicking the button ''Launch MCFD GUI'' in [[#Readout GUI|Readout GUI]]; 2) by clicking the icon **MCFD GUI** in the desktop of [[Software#u6pc5 (data U6)|u6pc5]]; 3) by navigating in a Linux terminal and typing ''$DAQBIN/MCFDControl16 --protocol usb --serialfile /dev/ttyUSB0''. The environment variable DAQBIN is defined by sourcing the **daqsetup.bash** file in directory **/usr/opt/nscldaq/xxxx/bin**, where xxxx is the nscldaq version number (11.0-015 on Oct 26, 2015).+The MCFD GUI can be started in three different ways: 1) by clicking the button ''Launch MCFD GUI'' in [[#Readout GUI|Readout GUI]]; 2) by clicking the icon **MCFD GUI** in the desktop of [[Software#u4pc8 (data U4)|u4pc8]]; 3) by navigating in a Linux terminal and typing ''$DAQBIN/MCFDControl16 --protocol usb --serialfile /dev/ttyUSB0''. The environment variable DAQBIN is defined by sourcing the **daqsetup.bash** file in directory **/usr/opt/nscldaq/xxxx/bin**, where xxxx is the nscldaq version number (11.0-015 on Oct 26, 2015).
  
  
Line 49: Line 49:
   * To load the default CFD configuration go to **Load Setting**, select file **MCFD16.tcl** in directory **/user/s800/s800daq/Configurations**, and click **Load**   * To load the default CFD configuration go to **Load Setting**, select file **MCFD16.tcl** in directory **/user/s800/s800daq/Configurations**, and click **Load**
    * Alternatively, it is possible to load the configuration directly from the module by clicking **Update from Device**.     * Alternatively, it is possible to load the configuration directly from the module by clicking **Update from Device**. 
-   * By default, the CFD parameters can be adjusted individually for each of the 16 channels. It is also possible use the module in a "common" mode to set the same CFD parameters to all channels. Just check **common**+   * By default, the CFD parameters can be adjusted individually for each of the 16 channels. It is also possible to use the module in a "common" mode to set the same CFD parameters to all channels. Just check **common**
   * After modifying any of the CFD parameters, click **Commit to Device**   * After modifying any of the CFD parameters, click **Commit to Device**
   * Don't forget to save the new settings in file **MCF16.tcl**.    * Don't forget to save the new settings in file **MCF16.tcl**. 
s800_daq_tools.txt ยท Last modified: 2023/10/19 17:25 by swartzj

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki