Differences

This shows you the differences between two versions of the page.

--- s800_daq_tools [2023/09/22 14:04]
swartzj [Delay Window]
+++ s800_daq_tools [2023/09/22 14:05]
swartzj [Delay Window]
@@ Line 75: / Line 75: @@
   * There are four "Delay Inspect" channels (routed to the patch panel in data U4) which can be selected using the Delay GUI
   * These "Delay Inspect" signals can be compared with any one of the four "Trigger Inspect" channels in order to set proper delays for the TDCs. The "Trigger Inspect" channels can be selected using the [[S800 DAQ tools#Trigger GUI|ULM trigger GUI]]
-  * TDCs of last 4 listed signals (including XF and object scintillators) are bypassed with cable delays and thus their delays cannot be controlled with the GUI. They can be inspected, however using the GUI
+  * TDCs of last 4 listed signals (including XF (DB5) and object scintillators) are bypassed with cable delays and thus their delays cannot be controlled with the GUI. They can be inspected, however using the GUI
   * It is possible to bypass the delay of a given channel by checking the "bypass" check box in the GUI
   * The TDC delays can only be changed when the run control is stopped; must SAVE settings before starting run control not to overwrite adjustments being made

S800 Documentation