S800 Documentation

User Tools

Site Tools

Trace:
s800_spectcl

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
s800_spectcl [2014/12/01 14:22]
pereira [S800 SpecTcl] 		s800_spectcl [2014/12/10 11:45]
pereira [Frequently used parameters for S800 SpecTcl]
Line 3: Line 3:
  
  
-The SpecTcl Control has been adapted for special functions required for the analysis of S800 data. SpecTcl can be open by from computer u6pc5 by clicking in the corresponding icon. The figure below shows the GUI control of the S800 analysis. +The SpecTcl Control has been adapted for special functions required for the analysis of S800 data. SpecTcl can be open by from computer [[Software#u6pc5 (data U6)|u6pc5]] by clicking in the icon **SpecTcl v6** located in its desktop, or from a Linux terminal by typing ''./SpecTcl'' from directory **/user/s800/operations/spectcl/s800v6** . The figure below shows the GUI control of the S800 analysis. 
  
 {{:wiki:SpecTclcontrol.jpg}} {{:wiki:SpecTclcontrol.jpg}}
Line 24: Line 24:
   * **s800.fp.crdc1 s800.fp.crdc2**   * **s800.fp.crdc1 s800.fp.crdc2**
     * **.x** and **.y**: x and y positions of the particles hitting the CRDCs (calibrated)      * **.x** and **.y**: x and y positions of the particles hitting the CRDCs (calibrated) 
-    * **.tac**: the raw drift time of the electrons in the CRDCs which finally relates to the y position via the mask calibration +    * **.tac**: the raw drift time of the electrons in the CRDCs which can be related to the y position via the mask calibration 
     * **.calc.x_gravity**, **.calc.x_fit**: the x position in the CRDCs calculated using two methods (center-of-gravity or Gaussian fit) to determine the CRDC x position from the charge distribution induced in the pads by the electrons drifting towards the anode wire.     * **.calc.x_gravity**, **.calc.x_fit**: the x position in the CRDCs calculated using two methods (center-of-gravity or Gaussian fit) to determine the CRDC x position from the charge distribution induced in the pads by the electrons drifting towards the anode wire.
-    *  .anode: amplitude of the CRDC anode signal (used for diagnostics) +    *  **.anode**: amplitude of the CRDC anode signal (used for diagnostics) 
   * **s800.fp.track**   * **s800.fp.track**
     * **.afp**: dispersive angle in the focal plane calculated from the x-y positions of the particles measured with the CRDCs      * **.afp**: dispersive angle in the focal plane calculated from the x-y positions of the particles measured with the CRDCs 
s800_spectcl.txt ยท Last modified: 2023/09/20 16:00 by swartzj

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki