Differences

This shows you the differences between two versions of the page.

--- s800_spectcl [2014/12/04 18:20]
pereira [S800 SpecTcl]
+++ s800_spectcl [2014/12/10 11:45]
pereira [Frequently used parameters for S800 SpecTcl]
@@ Line 24: / Line 24: @@
   * **s800.fp.crdc1 s800.fp.crdc2**
     * **.x** and **.y**: x and y positions of the particles hitting the CRDCs (calibrated)
-    * **.tac**: the raw drift time of the electrons in the CRDCs which finally relates to the y position via the mask calibration
+    * **.tac**: the raw drift time of the electrons in the CRDCs which can be related to the y position via the mask calibration
     * **.calc.x_gravity**, **.calc.x_fit**: the x position in the CRDCs calculated using two methods (center-of-gravity or Gaussian fit) to determine the CRDC x position from the charge distribution induced in the pads by the electrons drifting towards the anode wire.
-    *  .anode: amplitude of the CRDC anode signal (used for diagnostics)
+    *  **.anode**: amplitude of the CRDC anode signal (used for diagnostics)
   * **s800.fp.track**
     * **.afp**: dispersive angle in the focal plane calculated from the x-y positions of the particles measured with the CRDCs

S800 Documentation