S800 Documentation

User Tools

Site Tools

Trace:
trigger

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
trigger [2013/12/11 16:30]
pereira [Scalers and dead time] 		trigger [2013/12/11 16:38]
pereira
Line 1: Line 1:
 +====== Trigger ======
 The main purpose of the trigger is to implement a coincidence between the S800 focal-plane fast timing scintillator [[Detectors#Plastic scintillators|E1]] and a secondary detector principally located at the target location. This coincidence is often a mandatory requirement when the trigger rate of the S800 alone (S800 singles) is too high for the data acquisition and the resulting dead time is prohibitive.  The main purpose of the trigger is to implement a coincidence between the S800 focal-plane fast timing scintillator [[Detectors#Plastic scintillators|E1]] and a secondary detector principally located at the target location. This coincidence is often a mandatory requirement when the trigger rate of the S800 alone (S800 singles) is too high for the data acquisition and the resulting dead time is prohibitive. 
  
Line 142: Line 143:
  
 ^ Channel name ^ Channel number ^ Channel name ^ Channel number | ^ Channel name ^ Channel number ^ Channel name ^ Channel number |
-| Live.Trigger  | 10  | Raw.Trigger    | 9  | +| Live.Trigger  ^ 10 | Raw.Trigger    ^ 9 | 
-| Live.Clock    | 12  | Raw.Clock      | 11 | +| Live.Clock    ^ 12 | Raw.Clock      ^ 11 | 
-| S800.Source   |  0  | S800.Trigger   | 4  | +| S800.Source   ^ 0 | S800.Trigger   ^ 4 | 
-| Second.Source |  1  | Second.Trigger | 8  | +| Second.Source ^ 1 | Second.Trigger ^ 8 | 
-| Ext1.Source   |  2  | Ext1.Trigger   | 6  | +| Ext1.Source   ^ 2 | Ext1.Trigger   ^ 6 | 
-| Ext2.Source   |  3  | Ext2.Trigger   | 7  |  +| Ext2.Source   ^ 3 | Ext2.Trigger   ^ 7 |  
-| Coinc.Trigger |  5  |                |    | +| Coinc.Trigger ^ 5 |                ^  | 
-| E1.Up         | 16  | E1.Down        | 17 | +| E1.Up         ^ 16 | E1.Down        ^ 17 | 
-| E2.Up         | 18  | E2.Down        | 19 | +| E2.Up         ^ 18 | E2.Down        ^ 19 | 
-| CRDC1.Anode   | 22  | CRDC2.Anode    | 23 | +| CRDC1.Anode   ^ 22 | CRDC2.Anode    ^ 23 | 
-| TPPAC1        | 27  | TPPAC2         | 28 | +| TPPAC1        ^ 27 | TPPAC2         ^ 28 | 
-| OBJ.Scint     | 24  | XFP.Scint      | 25 | +| OBJ.Scint     ^ 24 | XFP.Scint      ^ 25 | 
-| TAR.Scint     | 26  | XFP.Scint      | 25 | +| TAR.Scint     ^ 26 | XFP.Scint      ^ 25 | 
-| S800.Source   |  0  | OBJ.Si         | 26 | +| S800.Source   ^ 0 | OBJ.Si         ^ 26 | 
-| S800.Source   |  0  | OBJ.Scint      | 24 | +| S800.Source   ^ 0 | OBJ.Scint      ^ 24 | 
-| S800.Source   |  0  | XFP.Scint      | 25 | +| S800.Source   ^ 0 | XFP.Scint      ^ 25 | 
-| Hodo.OR       | 30  |                |    | +| Hodo.OR       ^ 30 |                ^  | 
  
  
trigger.txt · Last modified: 2023/10/24 16:47 by swartzj

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
CC Attribution-Noncommercial-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki