Differences

This shows you the differences between two versions of the page.

--- trigger [2013/12/26 13:17]
pereira [Trigger]
+++ trigger [2013/12/26 13:20]
pereira [Trigger]
@@ Line 20: / Line 20: @@
 The main purpose of the trigger is to implement a coincidence between the S800 focal-plane [[Detectors#Plastic scintillators|fast timing scintillator E1]] and a secondary detector generally located at the target location. This coincidence is often a mandatory requirement when the trigger rate of the S800 alone (S800 singles) is too high for the data acquisition and the resulting dead time is prohibitive.
-The trigger logic is implemented in a LeCroy 2367 Universal Logic Module (ULM) by means of its XC4000E Xilinx FPGA. The main motivations for implementing the trigger logic in an FPGA driven module are the following:
+The trigger logic is implemented in a {{:wiki:Manual_LeCroy_ULM_2367.pdf|LeCroy 2367}} Universal Logic Module (ULM) by means of its XC4000E Xilinx FPGA. The main motivations for implementing the trigger logic in an FPGA driven module are the following:
   - Simplify cabling and setup of the trigger

S800 Documentation