Differences

This shows you the differences between two versions of the page.

--- trigger [2013/12/26 13:26]
pereira [Trigger box]
+++ trigger [2013/12/26 13:29]
pereira [Trigger module]
@@ Line 56: / Line 56: @@
 ==== Inspect channels ====
-A set of four inspect channels are patched out to the Data-U6 panels. Each channel can be assigned to any connection drawn on the GUI, thereby providing a convenient way to diagnose and adjust the timings at each step of the trigger circuit.
+A set of four inspect channels are patched out to the data-U6 panels. Each channel can be assigned to any connection drawn on the GUI, thereby providing a convenient way to diagnose and adjust the timings at each step of the trigger circuit.
@@ Line 69: / Line 69: @@
 ===== Trigger module =====
-The S800 trigger logic is built in a LeCroy ULM2367 FPGA module. Note that this module could be replaced in the future by another FPGA module provided it has enough NIM or ECL input/outputs (such as the VME XLM72 module for instance). This section contains the functionality of the S800 trigger module and the commands used to control its parameters.
+The S800 trigger logic is built in a FPGA {{:wiki:Manual_LeCroy_ULM_2367.pdf|LeCroy 2367}} Universal Logic Module (ULM). Note that this module could be replaced in the future by another FPGA module provided it has enough NIM or ECL input/outputs (such as the VME XLM72 module for instance). This section contains the functionality of the S800 trigger module and the commands used to control its parameters.
 ==== CAMAC commands ====

S800 Documentation