Differences

This shows you the differences between two versions of the page.

--- trigger [2015/10/20 11:50]
pereira [Scalers and dead time]
+++ trigger [2015/10/20 12:43]
pereira [Scalers and dead time]
@@ Line 174: / Line 174: @@
 In addition, scalers are connected to the raw and live trigger signals. For the determination of the dead time, both a free running and vetoed 10 kHz pulser signal are also connected to scalers. This is the preferred method because the pulser is not subject to possible double triggering effects like the raw trigger.
-The remining 16 scaler input channels (pins 17 to 32 in module) are connected to an ECL-NIM-ECL converter fed by a **16-channel Mesytech CFD**, which sends the signals from the S800 detectors (**E1 up,** **E1 down**, **CRDC1**, **CRDC2**, **OBJ_SCI**, **A1900 SCI**, and **OR Hodoscope**).
+The remining 16 scaler input channels (pins 17 to 32 in module) are connected to an ECL-NIM-ECL converter fed by a 16-channel {{:wiki:MCFD-16.pdf|Mesytec CFD (MCFD-16)}}, which sends the signals from the S800 detectors (**E1 up,** **E1 down**, **CRDC1**, **CRDC2**, **OBJ_SCI**, **A1900 SCI**, and **OR Hodoscope**).
 The complete list of scaler channels can be found [[Scaler Channel Description|here]].

S800 Documentation