Differences

This shows you the differences between two versions of the page.

--- vacuum_control [2013/12/21 07:25]
pereira [Object Box]
+++ vacuum_control [2013/12/26 14:49]
pereira [Vacuum controller]
@@ Line 1: / Line 1: @@
-====== Vacuum controller ======
+====== Vacuum control ======
@@ Line 17: / Line 17: @@
 ===== Target Chamber =====
-The venting and pumping of the target area vacuum chamber is taken care of by the experimenters.  Since this chamber is always shifting between two typical configurations (the arrangement for SeGA with just a beamline and the arrangement with the large scattering chamber), the status of the system as displayed on the PanelMate control page may not be reliable at any given time. The readout from the ion gauge should be fed into the PanelMate for either configuration.  The state display and the ability to control the two beamline gatevalves, I246GV and I255GV, should also be functioning in PanelMate for either configuration, but the interlock status display and the interlock functionality to protect from opening either gatevalve at the wrong time may not be set up correctly.
+The venting and pumping of the target area vacuum chamber is taken care of by the experimenters. Since this chamber is always shifting between different configurations, the status of the system as displayed on the PanelMate control page may not be reliable at any given time. The readout from the ion gauge should be fed into the PanelMate for either configuration.  The state display and the ability to control the two beamline gatevalves, I246GV and I255GV, should also be functioning in PanelMate for either configuration, but the interlock status display and the interlock functionality to protect from opening either gatevalve at the wrong time may not be set up correctly.

S800 Documentation

User Tools

Site Tools

Differences

Page Tools