venting_pumping_object_box
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | Next revision Both sides next revision | ||
|
venting_pumping_object_box [2023/05/30 14:31] swartzj |
venting_pumping_object_box [2023/05/30 14:32] swartzj |
||
|---|---|---|---|
| Line 11: | Line 11: | ||
| - Close the valve to the roughing pump RV. | - Close the valve to the roughing pump RV. | ||
| - Now you can plot the pressure at BPG to monitor the pressure before you open the vent valve. | - Now you can plot the pressure at BPG to monitor the pressure before you open the vent valve. | ||
| - | - **Keep a constant eye on the pressure level** as it increases rapidly. Before it nears 800 torr, **it is imperative that you close the venting valve.** Failure to do this will result in over pressure since the chamber will continue to be filled with dry nitrogen. | + | - **Keep a constant eye on the pressure level** as it increases rapidly. Before it nears 800 torr, **it is imperative that you close the venting valve.** Failure to do so will result in over pressure since the chamber will continue to be filled with dry nitrogen. |
| - You can now enter and open the chamber. | - You can now enter and open the chamber. | ||
venting_pumping_object_box.txt ยท Last modified: 2024/02/06 10:40 by noji
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
