• Determining biases
• Operation of gas handling systems
• Alarm support if initial response by experimenter does not resolve the issue

• Trigger changes
• Ionization chamber calibration
• Alarm monitoring and initial response
• Target chamber (Pivot-point area) vacuum system operation
• Mask calibration
• Tracking efficiency of OBJ scintillator
• Instalation of video camera in the Pivot-point area

• Determination of magnetic rigidity for spectrograph settings
• Implementing TOF and energy loss based PID corrections

In the absence of a S800 device physicist, please follow the official procedure for handing over the beam from the operators/beam physicists to the experimenters and vice versa: https://intra.nscl.msu.edu/ccf/infoexperimenters/handingoverbeam.php.

In case a S800 person needs to be contacted after-hours, please keep in mind that this has to be done by the Operator in Charge. In general, the operator routes requests from experimenters for after-hours laboratory resources to appropriate lab personnel (see https://intra.nscl.msu.edu/ccf/infoexperimenters/operators.php for more information).