A detailed description of the level of support from the Device physicist and the Beam physicist can be found in the S800 service level description and A1900 service level description documents. Please visit also the guidance policy document for experiments in the S3 vault.

• General tuning of S800 (XDT)
• Determining biases
• Operation of gas handling systems

• Trigger changes
• Installation of reaction targets in target area (pivot point)
• Target chamber vacuum system operation
• Tracking efficiency of OBJ scintillator
• Instalation of video camera in the Pivot-point area

• Determination of magnetic rigidity for spectrograph settings
• Implementing PID corrections
• Mask calibration
• Venting analysis-line lower-dipole sect

In the absence of a S800 device physicist, please follow the official procedure for handing over the beam from the operators/beam physicists to the experimenters and vice versa: https://intra.nscl.msu.edu/ccf/infoexperimenters/handingoverbeam.php.

In case a S800 person needs to be contacted after-hours, please keep in mind that this has to be done by the Operator in Charge. In general, the operator routes requests from experimenters for after-hours laboratory resources to appropriate lab personnel (see https://intra.nscl.msu.edu/ccf/infoexperimenters/operators.php for more information).