Differences

This shows you the differences between two versions of the page.

--- electronics [2015/09/07 11:49]
pereira [Electronic Diagrams]
+++ electronics [2023/10/16 08:25] (current)
noji Added the link to HV bias.
@@ Line 2: / Line 2: @@
   * [[Electronics#Crate Configuration|Crate Configuration]]
-  * [[Electronics#Inventory Modules|Inventory Modules]]
   * [[Electronics#Electronic Diagrams|Electronic Diagrams]]
+  * [[Electronics#Firmware Schematics|Firmware Schematics]]
   * [[Electronics#Documentation|Electronic Manuals]]
-  * [[Trigger|Trigger]]
+  * [[Trigger|ULM Trigger module]]
-     * [[Trigger#Trigger schemaatics|Trigger schematic]]
+  * [[Timing|Timing modules]]
-       * [[Trigger#Trigger box|Trigger box]]
+  * [[XLM Delay|XLM Delay module]]
-       * [[Trigger#Gate generation|Gate generation]]
+  * [[HV bias]]
-       * [[Trigger#Inspect channels|Inspect channels]]
-       * [[Trigger#Busy Circuit|Busy Circuit]]
-       * [[Trigger#Time Stamping Scheme|Time Stamping Scheme]]
-     * [[Trigger#Trigger module|Trigger module]]
-       * [[Trigger#CAMAC commands|CAMAC commands]]
-       * [[Trigger#Inputs and outputs|Inputs and outputs]]
-       * [[Trigger#FPGA firmware|FPGA firmware]]
-     * [[Trigger#Time stamping|Time stamping]]
-     * [[Trigger#Configuration for S800 in tandem with other detectors|Configuration for S800 in tandem with other detectors]]
-     * [[Trigger#Begin sequence|Begin sequence]]
-     * [[Trigger#Scalers and dead time|Scalers and dead time]]
 ===== Crate Configuration =====
-Most of the S800 electronics is installed in two racks inside the cabinet seating on the top level of the S3 vault, right in the north side of the [[Stations#Focal Plane Station|focal plane station chamber]] (see picture below). There is a total of six crates mounted in the two racks. The left rack contains a [[Electronics#CAMAC crate]] on the top and two NIM crates, [[Electronics#NIM crate 1]] on the middle and [[Electronics#NIM crate 2]] on the bottom. The right rack includes a [[Electronics#VME crate]] on the top, [[Electronics#NIM crate 3]] on the middle  and [[Electronics#NIM crate 4]] on the bottom.
+Most of the S800 electronics is installed in two racks inside the cabinet seating on the top level of the S3 vault, right in the north side of the [[Stations#Focal Plane Station|focal plane station chamber]] (see picture below). There is a total of six crates mounted in the two racks. The left rack contains a [[Electronics#CAMAC crate]] on the top and two NIM crates, [[Electronics#NIM crate 1]] on the middle and [[Electronics#NIM crate 2]] on the bottom. The right rack includes a [[Electronics#VME crate]] on the top, [[Electronics#NIM crate 3]] on the middle  and [[Electronics#NIM crate 4]] on the bottom. For an overview of the modules installed and their positions in the S800 crates, as at 16 May 2023, see the tables in the pdf that is linked to here:
+{{ :wiki:modules_in_s800_crates-may2023.pdf |The modules in the S800 crates, updated 16 May 2023}}
@@ Line 57: / Line 47: @@
-===== Inventory Modules =====
-In progress.
 ===== Electronic Diagrams =====
-  * {{:wiki:s800electronicstschematics-to20150907.pdf|Main Electronic Diagram}}
+  * {{:wiki:s800electronicstschematics.pdf|Main Electronic Diagram}}
   * {{:wiki:crdcdiagram.pdf|CRDC Schematic Electronic Diagram}}
   * {{:wiki:ionchamber.pdf|Ion Chamber Schematic Electronics Diagram}}
@@ Line 70: / Line 58: @@
+===== Firmware Schematics =====
+  * {{:wiki:Usbtrig.pdf|Trigger module firmware (ULM LeCroy 2367 )}}
+  * {{:wiki:Stamp64.pdf|Time stamping firmware (XLM72)}}
+  * {{:wiki:Crdc5v.pdf|CRDC readout firmware (XLM72V)}}
 ===== Documentation =====
@@ Line 77: / Line 68: @@
       * {{:wiki:manual_vm-usb_9_01_1.pdf|Manual for the VM-USB Wiener module}}
       * {{:wiki:manual_cc-usb_502_0.pdf|Manual for the CC-USB Wiener module}}
+      * {{:wiki:MCFD-16.pdf|Manual for the Mesytec MCFD-16 module}}
+      * {{:wiki:MTDC-32.pdf|Manual for the Mesytec MTDC-32 module}}
+      * {{:wiki:MADC-32.pdf|Manual for the Mesytec MADC-32 module}}
       * {{:wiki:Manual_LeCroy_ULM_2367.pdf|Manual for the ULM LeCroy 2367 module}}
       * {{:wiki:Manual_LeCroy_CFD_612a.pdf|Manual for the CFD LeCroy 612a module}}
       * {{:wiki:Manual_LeCroy_CFD_4413.pdf|Manual for the CFD LeCroy 4413 module}}
+      * {{:wiki:Manual_Canberra_CFD_454.pdf|Manual for the CFD Canberra 454 module}}
       * {{:wiki:Manual_LeCroy_CoincReg_4448.pdf|Manual for the Coincidence Register LeCroy 4448 module}}
       * {{:wiki:Manual_LeCroy_Scaler_4434.pdf|Manual for the Scaler LeCroy 4434 module}}
@@ Line 85: / Line 80: @@
       * {{:wiki:Manual_Tennelec_Amplifier_TC241S.pdf|Manual for the Amplifier Tennelec TC241S module}}
       * {{:wiki:Manual_Phillips_LogicUnit_755.pdf|Manual for the Logic Unit Phillips 755 module}}
-      * {{:wiki:Manual_Phillips_CFD_7186.pdf|Manual for the CFD Phillips 7186module}}
+      * {{:wiki:Manual_Phillips_TDC_7186.pdf|Manual for the TDC Phillips 7186 module}}
       * {{:wiki:Manual_Phillips_ADC_7164H.pdf|Manual for the ADC Phillips 7164H module}}
       * {{:wiki:Manual_Phillips_ADC_7164.pdf|Manual for the ADC Phillips 7164 module}}
       * {{:wiki:Manual_Ortec_TAC_566.pdf|Manual for the TAC ORTEC 566 module}}
       * {{:wiki:Manual_Canberra_HV_3002D.pdf|Manual for the HV Power Supply Canberra 3002D module}}
-  * Firmware FPGA Schematics
+      * {{:wiki:n568b_n568lc_rev4.pdf|Manual for N568B CAEN Spectroscopic amplifer}}
-      * {{:wiki:Usbtrig.pdf|Trigger module firmware (ULM LeCroy 2367 )}}
+      * {{:wiki:t122nl.pdf|Manual for EG&G/Ortec T122/NL Quad Updating Discriminator}}
-      * {{:wiki:Stamp64.pdf|Time stamping firmware (XLM72)}}
-      * {{:wiki:Crdc5v.pdf|CRDC readout firmware (XLM72V)}}

S800 Documentation

User Tools

Site Tools

Differences

Page Tools