User Tools

Site Tools


electronics

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
electronics [2016/12/28 16:41]
pereira [Electronics]
electronics [2023/10/16 08:25] (current)
noji Added the link to HV bias.
Line 8: Line 8:
   * [[Timing|Timing modules]]   * [[Timing|Timing modules]]
   * [[XLM Delay|XLM Delay module]]   * [[XLM Delay|XLM Delay module]]
 +  * [[HV bias]]
          
 ===== Crate Configuration ===== ===== Crate Configuration =====
  
-Most of the S800 electronics is installed in two racks inside the cabinet seating on the top level of the S3 vault, right in the north side of the [[Stations#Focal Plane Station|focal plane station chamber]] (see picture below). There is a total of six crates mounted in the two racks. The left rack contains a [[Electronics#CAMAC crate]] on the top and two NIM crates, [[Electronics#NIM crate 1]] on the middle and [[Electronics#NIM crate 2]] on the bottom. The right rack includes a [[Electronics#VME crate]] on the top, [[Electronics#NIM crate 3]] on the middle  and [[Electronics#NIM crate 4]] on the bottom. +Most of the S800 electronics is installed in two racks inside the cabinet seating on the top level of the S3 vault, right in the north side of the [[Stations#Focal Plane Station|focal plane station chamber]] (see picture below). There is a total of six crates mounted in the two racks. The left rack contains a [[Electronics#CAMAC crate]] on the top and two NIM crates, [[Electronics#NIM crate 1]] on the middle and [[Electronics#NIM crate 2]] on the bottom. The right rack includes a [[Electronics#VME crate]] on the top, [[Electronics#NIM crate 3]] on the middle  and [[Electronics#NIM crate 4]] on the bottom. For an overview of the modules installed and their positions in the S800 crates, as at 16 May 2023, see the tables in the pdf that is linked to here: 
  
 +{{ :wiki:modules_in_s800_crates-may2023.pdf |The modules in the S800 crates, updated 16 May 2023}}
  
  
Line 57: Line 58:
  
  
 +===== Firmware Schematics ===== 
 +  * {{:wiki:Usbtrig.pdf|Trigger module firmware (ULM LeCroy 2367 )}} 
 +  * {{:wiki:Stamp64.pdf|Time stamping firmware (XLM72)}} 
 +  * {{:wiki:Crdc5v.pdf|CRDC readout firmware (XLM72V)}}
 ===== Documentation ===== ===== Documentation =====
  
Line 81: Line 85:
       * {{:wiki:Manual_Ortec_TAC_566.pdf|Manual for the TAC ORTEC 566 module}}       * {{:wiki:Manual_Ortec_TAC_566.pdf|Manual for the TAC ORTEC 566 module}}
       * {{:wiki:Manual_Canberra_HV_3002D.pdf|Manual for the HV Power Supply Canberra 3002D module}}       * {{:wiki:Manual_Canberra_HV_3002D.pdf|Manual for the HV Power Supply Canberra 3002D module}}
-  * Firmware FPGA Schematics +      * {{:wiki:n568b_n568lc_rev4.pdf|Manual for N568B CAEN Spectroscopic amplifer}} 
-      * {{:wiki:Usbtrig.pdf|Trigger module firmware (ULM LeCroy 2367 )}} +      * {{:wiki:t122nl.pdf|Manual for EG&G/Ortec T122/NL Quad Updating Discriminator}} 
-      * {{:wiki:Stamp64.pdf|Time stamping firmware (XLM72)}} +  
-      * {{:wiki:Crdc5v.pdf|CRDC readout firmware (XLM72V)}} +
- +
  
electronics.1482961308.txt.gz · Last modified: 2016/12/28 16:41 by pereira