Differences

This shows you the differences between two versions of the page.

--- how_to_run_combined_s800_gretina [2016/03/17 09:21]
pereira
+++ how_to_run_combined_s800_gretina [2016/03/17 10:07]
pereira
@@ Line 2: / Line 2: @@
 In order to run the combined S800 + Gretina daq, the following steps need to be taken:
+First of all, make sure that the external synchronization and external clock () are enabled in the S800 ULM trigger module:
--  Start up the S800 data acquisition system as you normally would on spdaq19.
--  Log in using the experimental account to ddasdaq3 or any other of the systems
-   dual homed to the GRETINA/NSCLDAQ network.
--  godaq starts the Readout control program.
--  Click the Start button.  This will grab remote control over the S800 readout GUI.
-   You should now be able to start runs as needed in the experiment's ReadoutGUI running
-   on the dual homed system.
-When everything has started correctly you should have the following ring buffers
+  - [[S800 DAQ tools#Running the S800 DAQ|Run the S800 ReadoutGUI]] for the S800 data acquisition system as you normally would on spdaq19, and click the ''Start'' button.
-in the dual homed system (e.g. ddasdaq3):
+  - Log in using the experimental account to **ddasdaq3** or any other of the systems dual homed to the GRETINA/NSCLDAQ network.
+  - Use command ''godaq'' to run the Readout control program.
+  - Click the ''Start'' button.  This will grab remote control over the S800 Readout GUI. The S800 daq will now be in slave mode.
+  - You should now be able to start runs as needed in the experiment's ReadoutGUI running on the dual homed system.
-*  experimental-user-name  (e.g. e14045) this ring is where sampled coincidence data
+You can check the ring buffers using the command **/usr/opt/nscldaq/xxxxx/bin/ringbuffer status**, where xxxxx is the nscldaq version (as of March 2016, 11.0-020). If everything has started correctly you should have the following ring buffers in the dual homed system (e.g. ddasdaq3):
-   is placed.  This is done via a tapcat, glom pipeline.
-*  spdaq19.rawccusb - will provide raw data from the S800 CAMAC crate.
-*  spdaq19.rawvmusb - will provide raw data from the S800 VME crate.
-*  spdaq19.s800filter - will provide the event built, reformated data from the
-                       S800. During a run, data are pushed from this ring into the
-                       GRETINA GEB.
-In addition to the normal stagea are structure three directories are added that will
+  * **experimental-user-name (e.g. e14045)**: This ring is where sampled coincidence data is placed.  This is done via a tapcat, glom pipeline.
-be used to store raw S800 data:
+  * **spdaq19.rawccusb**: It will provide raw data from the S800 CAMAC crate.
+  * **spdaq19.rawvmusb**: It will provide raw data from the S800 VME crate.
+  * **spdaq19.s800filter**: It will provide the event built, reformated data from the S800 Filter. During a run, data are pushed from this ring into the GRETINA GEB.
-*  stagearea/rawccusb - Event files containing raw ccusb data from the s800.
+In addition to the normal **stagearea** structure in the experiment account, three directories are added that will be used to store raw S800 data:
-*  stagearea/rawvmusb - Event files containing raw vmusb data from the s800.
-*  stagearea/s800filter - Event files containing event build, reformatted
-                          s800 data.
+  * **~/stagearea/rawccusb**: Event files containing raw CCUSB data from the S800.
+  * **~/stagearea/rawvmusb**: Event files containing raw VMUSB data from the S800.
+  * **~/stagearea/s800filter**: Event files containing event build, reformatted S800 data from the S800 Filter.
-. On spdaq48 in /user/s800/operations/daq/usb/TclXXUSB do:
-**wish ./RunControl.tcl**
-or, on devop2 (the S800 MAC machine)
-click on the operations folder on the lower icon bar and select runcontrol.command
-. On a dataU machine logged in as the experimental account (e11007 for the June 2012 testing period) do
-**godaq**
-. On spdaq44 do:
-**/usr/opt/daq/10.1/bin/ringbuffer status**. The output should look similar to:
-<code>
- +----------------+------------+-------+-------------+--------+---------+---------+------+-------------+
- |Name            |data-size(k)|free(k)|max_consumers|producer|maxget(k)|minget(k)|client|clientdata(k)|
- +----------------+------------+-------+-------------+--------+---------+---------+------+-------------+
- |0400x           |8195        |8195   |100          |-1      |0        |0        |-     |-            |
- |s800            |8195        |8195   |100          |7485    |0        |0        |-     |-            |
- |-               |-           |-      |-            |-       |-        |-        |9143  |0            |
- |segatest        |8195        |8195   |100          |-1      |0        |0        |-     |-            |
- |spdaq48.0400x   |8195        |8195   |100          |17205   |0        |0        |-     |-            |
- |spdaq48.segatest|8195        |8195   |100          |-1      |0        |0        |-     |-            |
- +----------------+------------+-------+-------------+--------+---------+---------+------+-------------+
-</code>
-Upon start of run there will be another client of the s800 ring, which is the pushToGEB process. This should die on end run.
-The S800 daq will now be in slave mode, and run control is done from the NSCL daq window.

S800 Documentation

User Tools

Site Tools

Differences

Page Tools