inputs_and_outputs
This is an old revision of the document!
| Pin | Assignment | Pin | Assignment | Pin | Assignment | Pin | Assignment |
|---|---|---|---|---|---|---|---|
| A1 (in) | S800 source | B1 (out) | Raw trigger | C1 (in) | Busy 1 | D1 (out) | S800 source |
| A2 (in) | Secondary source | B2 (out) | Live trigger | C2 (in) | Busy 2 | D2 (out) | Secondary source |
| A3 (in) | External 1 source | B3 (out) | ADC gate | C3 (in) | Busy 3 | D3 (out) | External 1 source |
| A4 (in) | External 2 source | B4 (out) | QDC gate | C4 (in) | Busy 4 | D4 (out) | External 2 source |
| A5 (in) | Clear busy | B5 (out) | TDC start | C5 (in) | Busy 5 | D5 (out) | S800 trigger |
| A6 (in) | Clear module | B6 (out) | Trigger register gate | C6 (in) | Busy 6 | D6 (out) | Coincidence trigger |
| A7 (in) | Gretina sync | B7 (out) | C7 (in) | Busy 7 | D7 (out) | External 1 trigger | |
| A8 (in) | Time stamp clock | B8 (out) | Live trigger | C8 (in) | Time stamp latch | D8 (out) | External 2 trigger |
| B9 (out) | Inspect 1 | C9 (out) | Time stamp clock | D9 (out) | Secondary trigger | ||
| B10 (out) | Inspect 2 | C10 (out) | Time stamp latch | D10 (out) | Raw trigger | ||
| B11 (out) | Inspect 3 | C11 (out) | D11 (out) | Live trigger | |||
| B12 (out) | Inspect 4 | C12 (out) | D12 (out) | Raw pulser | |||
| B13 (out) | Fast clear | C13 (out) | D13 (out) | Live pulser | |||
| B14 (out) | C14 (out) | D14 (out) | Fast clear | ||||
| B15 (out) | Go | C15 (out) | D15 (out) | 10 Hz | |||
| B16 (out) | Time stamp clock | C16 (out) | D16 (out) | 1 Hz |
inputs_and_outputs.1386793992.txt.gz · Last modified: 2013/12/11 15:33 by pereira
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
