Differences

This shows you the differences between two versions of the page.

--- new_spectcl_in_python [2023/05/30 15:26]
swartzj
+++ new_spectcl_in_python [2023/06/01 09:22]
swartzj
@@ Line 31: / Line 31: @@
   * At the top of the CutiePie window you will see two rows of buttons, one for functionalities related to the selected spectrum and one below it related to the gates.
   * You can modify the geometry using two buttons in the top-right of the CutiePie window where you can adjust the numbers of rows and columns.
-  * To make a gate on a given spectrum, click on the 'Create' button. You can then choose a name for your gate and thereafter also the type e.g. 'c' for contour. You can left-click on different points of the spectrum to draw lines for this contour gate. Double-click to end and save the gate. This gate should now also show up in the TreeGui.
+  * To make a gate on a given spectrum, double-click on the spectrum, so the 'Create button becomes clickable, then click on the 'Create' button. You can then choose a name for your gate and thereafter also the type e.g. 'c' for contour. You can left-click on different points of the spectrum to draw lines for this contour gate. Double-click to end and save the gate. This gate should now also show up in the TreeGui.
   * Double-click to work on only one spectrum. Double-click again to return to multiple panels.
   * After selecting a gate, you can integrate over it using the purple 'Integrate' button.

S800 Documentation