User Tools

Site Tools


s800_daq_tools

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
s800_daq_tools [2020/03/05 12:25]
pereira [No data sources defined]
s800_daq_tools [2020/03/05 12:27] (current)
pereira [Mesytec CFD GUI]
Line 47: Line 47:
  
  
-  * To load the default CFD configuration go to **Load Setting**, select file **MCFD16.tcl** in directory **/user/operations/daq/usb/Config**, and click **Load**+  * To load the default CFD configuration go to **Load Setting**, select file **MCFD16.tcl** in directory **/user/s800/s800daq/Configurations**, and click **Load**
    * Alternatively,​ it is possible to load the configuration directly from the module by clicking **Update from Device**. ​    * Alternatively,​ it is possible to load the configuration directly from the module by clicking **Update from Device**. ​
    * By default, the CFD parameters can be adjusted individually for each of the 16 channels. It is also possible use the module in a "​common"​ mode to set the same CFD parameters to all channels. Just check **common**    * By default, the CFD parameters can be adjusted individually for each of the 16 channels. It is also possible use the module in a "​common"​ mode to set the same CFD parameters to all channels. Just check **common**
Line 53: Line 53:
   * Don't forget to save the new settings in file **MCF16.tcl**. ​   * Don't forget to save the new settings in file **MCF16.tcl**. ​
      - Go to ''​File''​      - Go to ''​File''​
-     - Click ''​Browse''​ and select directory **/user/operations/daq/usb/Config** (default)+     - Click ''​Browse''​ and select directory **/user/s800/s800daq/Configurations** (default)
      - Select file **MCFD16tcl** and click ''​Save''​      - Select file **MCFD16tcl** and click ''​Save''​
      - A warning window will pop out to verify that you want to overwrite the existing file. Answer ''​Yes''​      - A warning window will pop out to verify that you want to overwrite the existing file. Answer ''​Yes''​
s800_daq_tools.txt ยท Last modified: 2020/03/05 12:27 by pereira