Both sides previous revision
Previous revision
Next revision
|
Previous revision
Next revision
Both sides next revision
|
s800_spectcl [2018/05/02 16:23] pereira [S800 SpecTcl deployment] |
s800_spectcl [2018/05/02 16:24] pereira [S800 SpecTcl deployment] |
- Connect to s800 account, preferably from u6pc5. | - Connect to s800 account, preferably from u6pc5. |
- Check that the environment variable SPECTCLBINDIR is well defined: '' echo $SPECTCLBINDIR '' should give you **/user/s800/s800spectcl**. If that's not the case, edit .bashrc and define the variable (make sure to source .bashrc afterwards). | - Check that the environment variable SPECTCLBINDIR is well defined: '' echo $SPECTCLBINDIR '' should give you **/user/s800/s800spectcl**. If that's not the case, edit .bashrc and define the variable (make sure to source .bashrc afterwards). |
- Go to **/user/s800/s800develop/** and remove directory **s800spectcl_develop** | - Go to **/user/s800/s800develop/** and remove directory **s800spectcl** |
- Clone the master branch from the remote repository: ''git clone git@git.nscl.msu.edu:pereira/s800spectcl.git -b master'' (NOTE: the deployment of this repository is password protected. Contact Jorge Pereira (pereira@nscl.msu.edu), Ron Fox (fox@nscl.msu.edu), or Giordano Cerizza (cerizza@nscl.msu.edu) for assistance). | - Clone the master branch from the remote repository: ''git clone git@git.nscl.msu.edu:pereira/s800spectcl.git -b master'' (NOTE: the deployment of this repository is password protected. Contact Jorge Pereira (pereira@nscl.msu.edu), Ron Fox (fox@nscl.msu.edu), or Giordano Cerizza (cerizza@nscl.msu.edu) for assistance). |
- Type ''Make -f Make.s800 Install''. This Makefile does the following: | - Type ''Make -f Make.s800 Install''. This Makefile does the following: |
- Connect to s800 account, preferably from u6pc5. | - Connect to s800 account, preferably from u6pc5. |
- Check that the environment variable SPECTCLDEPLOY is well defined: ''echo $SPECTCLDEPLOY'' should give you **/user/s800/s800spectcl_deploy**. If that's not the case, edit .bashrc and define the variable (make sure to source .bashrc afterwards). | - Check that the environment variable SPECTCLDEPLOY is well defined: ''echo $SPECTCLDEPLOY'' should give you **/user/s800/s800spectcl_deploy**. If that's not the case, edit .bashrc and define the variable (make sure to source .bashrc afterwards). |
- Go to **/user/s800/s800develop/** and remove directory **s800spectcl_develop** | - Go to **/user/s800/s800develop/** and remove directory **s800spectcl** |
- Clone the master branch from the remote repository: ''git clone git@git.nscl.msu.edu:pereira/s800spectcl.git -b master'' (NOTE: the deployment of this repository is password protected. Contact Jorge Pereira (pereira@nscl.msu.edu), Ron Fox (fox@nscl.msu.edu), or Giordano Cerizza (cerizza@nscl.msu.edu) for help) | - Clone the master branch from the remote repository: ''git clone git@git.nscl.msu.edu:pereira/s800spectcl.git -b master'' (NOTE: the deployment of this repository is password protected. Contact Jorge Pereira (pereira@nscl.msu.edu), Ron Fox (fox@nscl.msu.edu), or Giordano Cerizza (cerizza@nscl.msu.edu) for help) |
- Type ''Make -f Make.s800 Deploy''. This Makefile does the following: | - Type ''Make -f Make.s800 Deploy''. This Makefile does the following: |