Differences

This shows you the differences between two versions of the page.

--- s800_usb_daq_data_format [2015/11/01 08:13]
pereira [Tag 0x0DDC: Mesytec MTDC-32 module]
+++ s800_usb_daq_data_format [2018/05/11 13:44]
pereira [S800 USB DAQ data format]
@@ Line 1: / Line 1: @@
 ====== S800 USB DAQ data format ======
-These pages contain information about the USB controller based data acquisition software of the S800. Two crates are read by the software (one CAMAC and one VME), but more could be easily added to the software.
+These pages contain information about the USB controller based data acquisition software of the S800. Two crates are read by the software (one CAMAC and one VME), but more could be easily added to the software. The data format described here is irrelevant for the user. This is so because the USB data are "filtered" by the [[Event Filter|S800 Filter]] before being distributed to the user.
@@ Line 211: / Line 209: @@
 ==== Tag 0x0DDC: Mesytec MTDC-32 module ====
-This module has multi-hit capabilities and a better resolution than the Phillips TDC. The format of the data is determined by the module, and schematically shown below.
+The [[Timing#MTDC|Mesytec TDC module (MTDC)]] has multi-hit capabilities and a better resolution than the Phillips TDC. The format of the data is determined by the module, and schematically shown below.
 ^ 0x0DDC ^ Header (0-15) ^ Header (16-31) ^ Data word (0-15) ^ Data word (16-31) ^ ... ^ Ender (0-15) ^ Ender (16-31) ^ 0xFDDC |

S800 Documentation