s800_version_0x0004
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
|
s800_version_0x0004 [2013/12/12 10:55] pereira |
s800_version_0x0004 [2013/12/12 11:01] pereira |
||
|---|---|---|---|
| Line 31: | Line 31: | ||
| Data read from the Lecroy 2367 ULM module and a Phillips 7186H TDC. One trigger pattern followed by up to four times. Format: | Data read from the Lecroy 2367 ULM module and a Phillips 7186H TDC. One trigger pattern followed by up to four times. Format: | ||
| + | < | ||
| | | ||
| + | </ | ||
| where p is the trigger pattern, c is the channel within the TDC and t the data. | where p is the trigger pattern, c is the channel within the TDC and t the data. | ||
| Line 41: | Line 43: | ||
| |Secondary source|11| | |Secondary source|11| | ||
| - | ==S800_TOF_PACKET== | + | ===== S800_TOF_PACKET |
| Times read from both a Phillips 7186H TDC and an Ortec 566 TAC digitized by a Phillips 7164 ADC. Format: | Times read from both a Phillips 7186H TDC and an Ortec 566 TAC digitized by a Phillips 7164 ADC. Format: | ||
| + | < | ||
| | | ||
| + | </ | ||
| - | {| class=" | + | ^ Time data ^ TDC channel |
| - | | Time data | + | |RF|12| | |
| - | | TDC channel | + | |Object Scintillator|13|5| |
| - | | TAC channel | + | |XFP Scintillator|14|4| |
| - | |- | + | |Si|15| | |
| - | |RF | + | |
| - | |12 | + | |
| - | | | + | |
| - | |- | + | |
| - | |Object Scintillator | + | |
| - | |13 | + | |
| - | |5 | + | |
| - | |- | + | |
| - | |XFP Scintillator | + | |
| - | |14 | + | |
| - | |4 | + | |
| - | |- | + | |
| - | |Si | + | |
| - | |15 | + | |
| - | | | + | |
| - | |} | + | |
| - | ==S800_SCINT_PACKET== | + | ===== S800_SCINT_PACKET |
| Energies and times of the focal plane scintillator, | Energies and times of the focal plane scintillator, | ||
| + | < | ||
| | | ||
| + | </ | ||
| - | {| class=" | + | ^ Detector signal |
| - | | Detector signal | + | |E1 Up|0| |
| - | | Channel | + | |E1 Down|1| |
| - | |- | + | |E2 Up|2| |
| - | |E1 Up | + | |E2 Down|3| |
| - | |0 | + | |E3 Up|4| |
| - | |- | + | |E3 Down|5| |
| - | |E1 Down | + | |
| - | |1 | + | |
| - | |- | + | |
| - | |E2 Up | + | |
| - | |2 | + | |
| - | |- | + | |
| - | |E2 Down | + | |
| - | |3 | + | |
| - | |- | + | |
| - | |E3 Up | + | |
| - | |4 | + | |
| - | |- | + | |
| - | |E3 Down | + | |
| - | |5 | + | |
| - | |- | + | |
| - | |} | + | |
| - | ==S800_FP_IC_PACKET== | + | |
| + | ===== S800_FP_IC_PACKET | ||
| Zero suppressed energies from the ionization chamber, read from a Phillips 7164 ADC. Format: | Zero suppressed energies from the ionization chamber, read from a Phillips 7164 ADC. Format: | ||
| + | < | ||
| | | ||
| + | </ | ||
| - | ==S800_FP_CRDC_PACKET== | + | ===== S800_FP_CRDC_PACKET |
| Data from the two S800 CRDCs in the form of digitized waveform samples read from the Jtec XLM72V ULM, and anode energies and times read from a Phillips 7164 ADC. These packet data contain sub packets. The S800_FP_CRDC_RAW_PACKET contains the waveform samples and the S800_FP_CRDC_ANODE_PACKET contains the energies and times. Each CRDC is read out sequentially and it's data preceded by an id word. Format: | Data from the two S800 CRDCs in the form of digitized waveform samples read from the Jtec XLM72V ULM, and anode energies and times read from a Phillips 7164 ADC. These packet data contain sub packets. The S800_FP_CRDC_RAW_PACKET contains the waveform samples and the S800_FP_CRDC_ANODE_PACKET contains the energies and times. Each CRDC is read out sequentially and it's data preceded by an id word. Format: | ||
| + | < | ||
| | | ||
| + | </ | ||
| where i is the id number (0 or 1). | where i is the id number (0 or 1). | ||
| - | ===S800_FP_CRDC_RAW_PACKET=== | + | ==== S800_FP_CRDC_RAW_PACKET |
| - | Sub packet of [[# | + | Sub packet of [[S800 version 0x0004# |
| + | < | ||
| | | ||
| + | </ | ||
| where t is the threshold. The waveform data is written using two consecutive words per sample, to be upacked from the following format (binary representation): | where t is the threshold. The waveform data is written using two consecutive words per sample, to be upacked from the following format (binary representation): | ||
s800_version_0x0004.txt · Last modified: 2013/12/12 11:05 by pereira
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
