scaler_channel_description
This is an old revision of the document!
Scaler channel description
The list below is a direct copy of the scaler description file for the s800. This file maps channel names to channel numbers, and in addition determines the layout.
| Channel name | Channel number | Channel name | Channel number |
|---|---|---|---|
| Live.Trigger | 10 | Raw.Trigger | 9 |
| Live.Clock | 12 | Raw.Clock | 11 |
| S800.Source | 0 | S800.Trigger | 4 |
| Second.Source | 1 | Second.Trigger | 8 |
| Ext1.Source | 2 | Ext1.Trigger | 6 |
| Ext2.Source | 3 | Ext2.Trigger | 7 |
| Coinc.Trigger | 5 | ||
| E1.Up | 16 | E1.Down | 17 |
| E2.Up | 18 | E2.Down | 19 |
| CRDC1.Anode | 22 | CRDC2.Anode | 23 |
| TPPAC1 | 27 | TPPAC2 | 28 |
| OBJ.Scint | 24 | XFP.Scint | 25 |
| TAR.Scint | 26 | XFP.Scint | 25 |
| S800.Source | 0 | OBJ.Si | 26 |
| S800.Source | 0 | OBJ.Scint | 24 |
| S800.Source | 0 | XFP.Scint | 25 |
| Hodo.OR | 30 |
scaler_channel_description.1386868868.txt.gz · Last modified: 2013/12/12 12:21 by pereira
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
